Here is another xhorse vvdi bimtool pro tutorial- BMW E61 Airbag Passenger Seat Occupancy off sensor encoding. The procedure can be applied to E61 E60 E90 E92 E87 chassis.
VVDI BIMTool is for key, coding and programming. Many function that cgdi bmw does not have.
NOTE:
Depending on the diagnostic device used, error 93C1 can be displayed in different formats.
Error code 93C1
Conversion Hexadecimal 93C1
Decimal 37825
OBD code B13C1
Instruction:
Connect VVDI BIMTool Pro with vehicle
Run Software, Select Exx Program/Code->Connect Car
Auto detect vehicle information
Select CAS-> Module information/DTCs-> Select Airbag module-> Gateway Registered Unit-> Module information/DTCs->Read Unit inforamtion-> Read DTC
VVDI BIMTool Pro reads DTC 37825: ACSM/MRS: Communication Fault, Seat occupancy detector, passenger
Google search the fault code, it is the same fault code read by im608
Select ACSM60 Airbag module, press Unit coding
Read coding
Save Configure File
Load Configure File
Select Seat occupancy detection SBE1, Not enabled– and Write coding
VVDI BIMTool pro coding completed.
No DTC exists.
IM608 says no fault code detected as well
Read Configure file and save new configure data
Done.