Problem:
Xhorse vvdi key tool max pro stuck on firmware upgrade interface.
It’s 30 minutes now the machine is not updating what can I do please?
Solution:
Cancel the update, connect to a more powerful network, update again.
Reboot and connect to another server.
If still failed, clear cache, or do factory reset device and check again.
Press and hold the power button for 12 seconds until the device reboots, or access the settings menu, applications, and the “Xhorse” option, then go to “Storage” and clear data or cache.
Remember that to update the device, you must have good network without pressing the power button and have a good battery.
The “wipe data” option allows you to delete everything, resetting it to 0. The “wipe cache” option only resets the application settings.
If it doesn’t work for you, keep the button pressed. Some regions don’t allow it, just with the device on. Tap it once. The shutdown menu will appear. Hold your finger down in the middle of the 4 buttons. Read the chip flashlight frequency option without touching any of the 4 buttons in the middle. The reboot menu will appear.