Godiag BMW CAS2/CAS3 test platform tested working perfectly with xhorse vvdi key tool max pro.
Example:
program BMW CAS3+ key with key tool max pro and godiag test platform on bench via eeprom
Pull out the CAS3+ module, read eeprom with vvdi prog or multi prog programmer.
NOTE:
key tool max pro does have EEPROM function and will read BMW CAS1/CAS2/CAS3/CAS3+ eeprom, it cannot read CAS3 ISTAP version eeprom (need VVDI2 or VVDI BIMTool Pro.)
But it will read part of CAS3+ data, the data can only be used to generate dealer key.
So better read full eeprom with ecu programmer, then load to key tool max pro via i.xhorse.com online cloud center.
Then connect godiag adapter with key tool max pro via the main cable
Select Key function
Generate keys via EEPROM->Make dealer key->CAS3+ (0L15Y, 0M23S)-
Load CAS3+ eeprom file saved
Select an unused key position and program key.
Xhorse VVDI BIMTool pro also tested working fine with the godiag test platform.
VVDI BIM TOOL PRO also does CAS3/CAS3+/CAS3+ ISTAP without problems via OBD with the help of a battery maintainer.
