Ensure your Xhorse Dolphin XP005 Key Cutting Machine operates with precision by following this step-by-step calibration guide. Proper setup guarantees accurate cuts and extends machine longevity.
Refer to the complete operation video tutorial:
https://www.youtube.com/watch?v=3b3cXzeqieM
Step 1: M5 Clamp Setup
- The Dolphin XP005 includes an upgraded M5 Clamp with dual sides (A & B).
- Loosen the knob, flip the clamp to the desired side, and secure it.
Step 2: Height Leveling
Follow the tips to calibrate: Height Level Adjustment >> Start
The cutter tip must sit slightly higher than the probe tip before calibration.
Step 3: Probe Calibration
Calibrate the probe height to ensure precise key measurements.
Step 4: Test Cut & Final Calibration
- Insert a blank key into Clamp Side A, aligning the top with Line 3.
- Clear debris during cutting for smooth operation.
- Run a calibration test cut to verify accuracy.
Tips: For calibration keys, visually uneven sides are normal; only ensure both sides are cut.
Step 5: Ready to Use!
Once calibrated, your Dolphin XP005 is set for high-precision key cutting.