How do you see which ECUs are supported for Checksum calculation in Xhorse Multi Prog?
Follow the tips below:
1.Keep your multi prog software updated.
2. It is for many known that multi prog do not support checksum calculation for all the listed ECUs in the program.
But one way you see which are supported, you can browse the library under [Device], there you see in picture over the little green [c] after either eprom or flach. This ecu/files should then be supported for checksum calculation.
You also see this green [c] after the [eeprom] or the [flash] in the main picture.
If an ECU is supported, and when you click [Write to ecu], multi prog automaticaley prompt you with the screen over. There you can choose to do the verify or not.
Click [verify] and after some minutes you will get the result.
