The Xhorse CONDOR XC-003 is a versatile key-cutting machine designed for precision and efficiency. It handles double-sided flat keys with ease, offering cutting, polishingand safety features. Below is a simple step-by-step guide to using this machine.
Step 1: Power On & Setup
- Turn on the main power switch.
- Press the white button to activate the lighting.
Step 2: Key Alignment (Two Methods)
Method 1: Head Positioning (Example: Hyundai Elantra Key #50)
- Rotate both side clamps to Side D.
- Secure the original key in the left clamp.
- Insert the key positioning plate into the slot and push the key until it touches the plate.
- Tighten the clamp.
- Repeat the same steps for the right main clamp to secure the key length.
- Remove the positioning plate.
Method 2: Shoulder Positioning (Example:#15 NE38 Key)
- Rotate both clamps to Side A.
- Secure the original key in the auxiliary clamp and align it using the shoulder positioning plate.
- Fix the key blank in the main clamp, aligning it with the plate.
- Remove the shoulder positioning plate.
Step 3: Cutting the Key
- Short press the red button to enter Standard Mode (safer and energy-efficient).
- Firmly hold and lift the main handle.
- Align the key with the rotating cutter and slowly advance both the main and auxiliary handles for smooth cutting.
- After cutting one side, flip the key and repeat the process for the other side.
Step 4: Polishing the Key
- Long press the red button to enter Continuous Run Mode.
- Use the high-speed grinding wheel to polish the edges for a smooth finish.
- This prevents scratches and ensures better lock operation.
Conclusion
The CONDOR XC-003 is a reliable machine for cutting and polishing double-sided flat keys. Its switchable modes enhance safety, while the built-in grinding wheel ensures professional results.
For any questions about the XC-003, feel free to contact us!