The Xhorse Dolphin XP005L Key Cutting Machine is a professional tool designed for automotive locksmiths and DIY users. This tutorial guides you step-by-step to create a working emergency car key for the Audi Q5 (model years 2008–2015) using the HU66 shoulder-aligned blade.
Tools & Preparation:
Original Audi Q5 key (for decoding)
New HU66 key blank
Step-by-Step Cutting Guide:
- Select Vehicle & Key Type
Navigate: Vehicle Database → Audi → Q5 → 2008-2015 → select HU66 (Shoulder Align).
- Mount the Original Key
Install the original key on the M5 Clamp, Side B, using the shoulder align position. Clear any metal debris and press the key blank firmly with your fingers to ensure smooth operation.
- Decode the Key
Press “Decode Key.” The Dolphin XP005L will automatically read the key pattern.
- Install the Key Blank
Once decoding is complete, remove the original key and install a new HU66 key blank.
- Cut the Key
Press “Cut Key → Cut.” The machine will cut the first side, then prompt you to turn the key over to cut the second side. The entire cutting process takes only a few minutes.
- Verify the Key
Remove the cut key and inspect it. Test the key in the car door lock—it should turn smoothly and open the door successfully.
✅ Completion
Your Audi Q5 emergency key is now ready for use. If you encounter issues, ensure the key is fully seated in the clamp and that the shoulder alignment is correct.
Need to make it a fully functional key?
If your Audi Q5 uses a transponder or remote key, you will need to program it using a tool like the Xhorse VVDI Key Tool Max PRO.
Frequently Asked Questions (FAQ)
Q: Can the Dolphin XP005L cut keys for other Audi models?
A: Yes. The machine supports a wide range of Audi models and key types through its built-in vehicle database.
Q: What should I do if the cut key does not turn smoothly?
A: Check for metal debris in the clamp or lock, verify shoulder alignment, and ensure the key blank is properly positioned before cutting.
Q: Is the Key Tool Max Pro necessary for key programming?
A: The Key Tool Max Pro is recommended for programming transponder keys and remote heads, but is not required for mechanical key cutting.
Need Key Blades or Other Xhorse Key Cutting Machine? Visit our official store for a full range of compatible products and accessories.