Xhorse Mini Prog Read BMW EDC17C50 ISN with Multi Function Adapter
Just done a test using the xhorse multifunction adapter with xhorse mini prog and it works fine. I read BMW ECU, first using vvdi prog. […]
Just done a test using the xhorse multifunction adapter with xhorse mini prog and it works fine. I read BMW ECU, first using vvdi prog. […]
Xhorse VVDI Prog programmer V5.0.6 new software update is ready for BCM2 adapter. V5.0.6 2021-09-13 * This version DON’t need update firmware + Add D70F3485 option […]
Here comes the proper solution to xhorse vvdi prog device error. The problem goes like this: I’ve been using vvdi-prog for a long time […]
Here is our suggestion to solve vvdi prog problem reading st 95xxx eeproms. The problem goes like this: I have problems read st 95xxx eproms. Have tried 9508. […]
With the help of vvdishop.com engineer, my problem was settled. The problem goes like this: xhorse vvdi prog said chip not connected when i tried […]
Problem: I had a problem with the xhorse vvdi prog. It failed to read Range Rover velar 2018 Renesas V850 D70F33506 mcu and gave error try frequency […]
It’s a Opel Movano 2015 from BCM2, sam with Renault Master III with MCU RENESAS-V850 D70F3376A. I cannot read with xhorse vvdi prog. I have always fault ‘Try Frequency […]
Xhorse VVDI Prog programmer software is released to new version 5.0.5 on July 30th, 2021. VVDIProg v5.0.5 (2021-07-29) * This version DON’t need update […]
It is very easy and quick to read BMW CAS3+ 0L15Y EEPROM data with the Xhorse Mini Prog and Xhorse Solder Free CAS 3 adaptor without soldering. […]
Confirmed! Xhorse vvdi prog read and write Opel Insignia 2011 year body control module (BCM) mask 2M42E no issue. vvdi prog software does not give wiring […]
Xhorse VVDI Prog programmer software update to V5.0.4 on June 1st, 2021. * This version DON’t need update firmware + Add PIC18XX25K80, PIC18XX26K80, PIC18XX45K80, […]
Easy 3 steps to complete Toyota Yaris 93C66 all keys lost job without soldering. Xhorse Mini Prog and key tool max are required here to finish […]
Problem My Xhorse VVDI Prog M35080/D80 Adapter can read 160d0wq chip successfully, but cannot erase & write it. No error. It says cracking then erase […]
Xhorse VVDI Prog software released new update on May 28th, 2021. * This version DON’t need update firmware + Add FM3104, FM3116, FM3164, FM31256, options […]
Xhorse VVDI Prog supports the Motorola MCU MC9S12XEP100 chip. There is a secured and unsecured variant. I going to read the secured mcu data. The connection diagram […]
Copyright © 2026 | WordPress Theme by MH Themes