Xhorse ECU programmer

A Russian customer gave the feedback that his Xhorse Multi-Prog Software is unable to update. It prompted: “Database not read, must be updated before use!” […]

Xhorse Multi Prog read and write Hyundai KEFICO MEG17.9.13 ECU on bench successfully. Select Hyundai->Kia MEG17.9.13 Check wiring diagram Connect Multi-prog with ECU following the […]

Problem: Trying to read a Mercedes W906 9S12DT256 with xhorse multi prog, it said not connect to the device and will not read mcu. Any […]

It is a processor MC68HC08AZ32. Try to read the processor from Security Byte using two programmers, Xhorse Multi Prog and UPA-USB S. See which one […]

Here comes the Xhorse Multi Prog programmer customer feedback. Update on the BMW Bosch edc16cp35 ecu. So after no comms with ecu I took apart […]

Xhorse Multi Prog programmer read Mercedes Benz Bosch EDC17CP01 ECU on bench successfully. Quick search EDC17CP01 and check wiring diagram. Connect multi prog with ECU […]

It is a Landrover Discovery 2013. Here we show how to read EDC17CP11 ECU and turn immo off with xhorse multi prog programmer.   With […]

Xhorse Multi Prog programmer read and write VAG EDC17C46 ECU successfully. Bench mode. Read INT eeprom ok, Read INT flash ok, Write INT eeprom ok, Write INT […]

Some users asked what the Xhorse Multi Prog OBD cable in the package is used for. The OBD cable connects multi-prog with vehicle via OBD […]

Problem: Xhorse Multi prog was not detected by the Windows 7 system. It says USB device is not recognized. Any solution? Solution: If it is […]