
Xhorse Multi Prog Read BMW MSD80.2 ISN Code
Xhorse Multi-Prog read BMW Continental MSD 80.2 DME on bench successfully. Got a “faulty” ecu from BMW, MSD 80.2 and test it on bench with […]
Xhorse Multi-Prog read BMW Continental MSD 80.2 DME on bench successfully. Got a “faulty” ecu from BMW, MSD 80.2 and test it on bench with […]
We here just to inform you that Xhorse Multi Prog software V1.2.3.0 and firmware V1.2.7 fix the issue that the adapter for the CAS4 not […]
Problem: Cannot be used after update, should update v1.7.8, but can’t update xhorse dolphin xp005 key cutting machine. Any solution? Solution: Update via PC. Download […]
Some users reported that they failed to generate Xhorse XSSBR0EN Subaru XM38 remote on Subaru 8A/4D smart key models. For example: Tried to generate KeylessGp 4D, […]
Now, the Xhorse MQB RH850 V850 Adapter for Multi-Prog is available. It supports reading VW 4th gen Johnson Controls 34xx series, MQB-RH850(R7F) series and MQB […]
MITSUBISHI 4M50 BOSCH EDC7C4 ECU read and write successfully by Xhorse Multi Prog programmer on bench. Read on bench ok Write on bench ok multiprog will […]
The instruction is to force Unlock BMW CAS4 with Xhorse Multi Prog if simple Unlock does not work. Connect CAS4 module with multi prog […]
Here are the tips to generate and modify Xhorse Toyota XM38 key for a Lexus rx350, FCCID: HYQ14FBB (231451-0010 “G” Board). User report: “Did […]
Seat Leon FR 2019 virtual cockpit all keys lost is done with Xhorse vvdi key tool plus and RH850 adapter. Cluster number 5F0920790A Processor: R7F701401 […]
Xhorse Multi Prog software update to V1.2.3.0 on July 17th, 2024. 2024.07.17 1. Fix errors in converting S19, HEX files, and bin files to each […]
Today I’m gonna use Xhorse Multi Prog Programmer to do cloning for a 2009 Land Rover Discovery 3 CEM. I’ve selected my Discovery 3 SIM. […]
Problem: During attempting reading BMW CAS4 d-flash with Xhorse vvdi key tool plus and CAS4 solderless adapter, get this error message: ‘self test error, power […]
It is a PSA Delphi DCM6.2C SPC5674F ECU. Read and write DCM6.2C in boot successfully with Xhorse Multi prog. Read in boot ok. Write in […]
Problem: One of our customers failed to calibrate the Xhorse Dolphin XP005L key cutting machine. The dolphin ii reported error code 6 during the calibration […]
Xhorse Multi Prog new user report: Multi prog read and write success Audi 2014 SQ5 8hp55a. Read original module twice and compared data all ok. Read […]
Copyright © 2025 | WordPress Theme by MH Themes