Toyota RAV4 2015 H AKL done by Xhorse Key Tool Max and 8A Cable Kit

April 7, 2021 VVDISHOP Xhorse Key Programmer 0

Xhorse vvdi 8A adapter kit works perfectly on Toyota RAV4 2015 (with H chip, none-smart key) when all keys lost. This procedure works with other Toyota 8A chip as well, i,e a Toyota Hilux 2018. The vvdi 8A cable kit works until 2019 in normal key.

You need to modify the connector that goes to the coil plug because some are different.

Device required:

Xhorse vvdi key tool max + mini obd tool + 8A control box H adapter kit

Xhorse vvdi super chip

(Other cables that connected where the relay goes are included in the xhorse 8A cable kit. This is for standard 8A turn keys, no smart key)

xhorse app will show you wiring diagram, you can also check wiring here

Procedure:

Disconnect positive terminal

Locate IGN2

Relay in Passenger side fuse box

Plug in the VVDI J3 Relay

Plug the J5 pLug into the reader harness

Connect J4 obd plug with vehicle via OBD socket

Connect vvdi 8A cable with J6 plug

Then connect Xhorse Mini OBD Tool with 8A adapter

Connect power supply cables

Connect xhorse key tool max with the mini OBD via Bluetooth

Select 8A Immo box all key lost- OBD make master key

Put a VVDI super chip into key tool max, prepare to make master key which can start car directly

Calculate online and generate master key success
Jobs done.

www.vvdishop.com

Copyright © 2025 | WordPress Theme by MH Themes

Copy Protected by Chetan's WP-Copyprotect.