Xhorse Multi-Prog

Problem: Xhorse Multi prog was not detected by the Windows 7 system. It says USB device is not recognized. Any solution? Solution: If it is […]

Xhorse Multi Prog programmer new user report: Porsche Boxster BCM programming is done. Replace a new BCM. BCM mark 1N35H Bench mode Read D-FLASH and P-flash […]

Problem: Tried to read VAG MQB RH850 RF7 cluster with xhorse multi prog. When i zoom in on the wiring diagram it becomes very blurred. Gets to 80% then hangs for 5 seconds then says retry. Any solution? VVDISHOP.COM Solution:   Press”Retry” in the […]

Xhorse Multi-Prog read and write Renesas V850 EPS (Electric Power Steering) module on a Land rover Range Rover Sport. Processor: Renesas D70F3485 Using wiring diagram pinout (Land rover Evoque/Benz […]

Xhorse Multi-Prog read BMW Continental MSD 80.2 DME on bench successfully.   Got a “faulty” ecu from BMW, MSD 80.2 and test it on bench with […]

We here just to inform you that Xhorse Multi Prog software V1.2.3.0 and firmware V1.2.7 fix the issue that the adapter for the CAS4 not […]

MITSUBISHI  4M50 BOSCH EDC7C4 ECU read and write successfully by Xhorse Multi Prog programmer on bench. Read on bench ok Write on bench ok multiprog will […]

The instruction is to force Unlock BMW CAS4 with Xhorse Multi Prog if simple Unlock does not work.   Connect CAS4 module with multi prog […]

Today I’m gonna use Xhorse Multi Prog Programmer to do cloning for a 2009 Land Rover Discovery 3 CEM. I’ve selected my Discovery 3 SIM. […]

It is a PSA Delphi DCM6.2C SPC5674F ECU. Read and write DCM6.2C in boot successfully with Xhorse Multi prog. Read in boot ok. Write in […]

Xhorse Multi Prog new user report: Multi prog read and write success Audi 2014 SQ5 8hp55a. Read original module twice and compared data all ok. Read […]

You can read BMW EWS4.x immo box by soldering or with Xhorse EWS4 solder free adapter. Here we show how to read EWS4.4 with Xhorse Multi […]