Is it possible to clone original read from audi A3 2013 MQB cluster to another cluster with exact same MCI D70F3537. Original cluster dead after full read. I have already calculated sync data for dealer key preparation. All keys lost originally.
But after cluster read. And attempt to reset cluster didn’t work. I just need to confirm if it is possible to take original read over to donor cluster.
Original cluster part number is 8V0920870. 0570. H24
Donor cluster part number is 8v0920870G. 2220. H03.
Both cluster is 2013 year model. And both for audi car.
Will it be possible to clone D70F3537 from one to another directly on bench using Xhorse multi prog with MQB adapter?
Feedback:
If the sw and hw are the same then it is possible.
I used sync data to prepare dealer key successfully.
Select dashboard replace. Xhorse Vvdi2 asked for old dash encrypted data and new dash encrypted data. Calculated another file to be written with multi prog or vvdi prog. File written successfully. All info from old dash into new dash. Prepared dealer key with sync data. Used immo data selection to learn key successfully.
Car started and removed coded automatically when key learned.