How to program a dealer key for Land Rover Discovery 3 CEM all keys lost with Xhorse VVDI Key Tool Plus? Below I’m gonna show the procedure.
- Read CEM Data
After soldering to the CEM let’s continue to program keys.
Prog >> IMMO >> LandRover >> DISCOVERY3-CEM >> READ >> Start >> Continue
All reading success.
Save the file.
- Generate Transponder
Put the VVDI Super Chip into Key Tool Plus coil.
Generate Transponder >> ID46(PCF7936) >> New 7936 chip >> Generate
Complete.
- Make Dealer Key
Immo data tool >> Land Rover >> Discovery >> Discovery 3 >> Start >> Selected the saved data file >> Selected key number: key 1 >> MAKE DEALER KEY >> VVDI Super chip – Select used position, NO NEED write EEPROM
Start make key, please wait…
Prepare dealer key success. Now the key can start engine.
Done.
