Today I’m gonna show how to add a key for 2016 Kia Sportage with Xhorse VVDI Key Tool Plus Pad.
Plug Key Tool Plus connector into OBD2 port.
Separate outer shell of smart key, then take out chip to connect Key Tool Plus via cable.
Remote program >> Search h3000 >> KIA – all remotes >> KX5 95430-H3000 >> Generate
Wait writing data until 100%…
Program IMMO Key
Go back to main function page, press
Immo programming >> Asia >> Kia >> Select from system >> Remote key adaptation >> 16 PIN >> Type 2(CAN) >> Start programming >> Remote key adaptation
Please choose OBDII interface, and turn on the ignition switch to ON.
Switch ignition off, remove the key, press “OK” to continue.
Match remote: press UNLOCK or LOCK button for more than 1s.
Match 1 remote successfully.
Press “OK” to add next one, repeat same operations as before.
Press “Cancel” to complete.
Put the original working key into VVDI Key Tool Plus slot, press
Transponder clone >> Read transponder >> Transponder clone >> Start clone
Take out the original key, and put in a new key instead.
Let’s try the keys, both can work fine.
This is using Xhorse VVDI Key Tool Plus to add keys for a 2016 Kia Sportage success.