It is a great convenience for work to use Xhorse Key Reader & Dolphin XP005 cooperatively. Locksmiths can perform key cutting after identification in Xhorse system directly. Following I’m gonna decode & cut a HU66 key as demo.
Finish to connect all devices, go to
Cut by bitting >> HU66 >> OK >> Optical identification
Push Key Reader button to put into the key.
Click on “Identification” twice.
It’ll start decoding automatically…
Reading was successful in seconds.
There’s a quick scan on screen, it’s 12443231.
The Xhorse key reader did all right.
8 bittings are all correct. They’re really on point. I do notice that Key Reader is really more accurate with high security keys.
Install a new key and tip it to align M2 clamp C side.
Cutting key >> Cut
Dolphin XP005 machine will start cutting according to command.
Just repeat to cut the other side…
Test the key once completed.
It can open the lock smoothly.
I do really recommend this XDKR00GL Key Reader, Xhorse never leaves me disappointed. It’s quite smart to work with Xhorse Key Cutting Machines to avoid a lot of trouble.