Original Xhorse VVDI Prog programmer =(BMW ISN READ)+(EERPOM read)+(mcu read MOTO 9S12,5M48,,,,)+PIN CODER Calculation (more pin coder Algorithm ,than 40 type).
VVDI-prog functions & descriptions
VVDI Prog Main Features:
- 35080, 080D0, 160D0, erase quickly,erase Can be done in 10 s.
- While reading MC9S12 series Chips, VVDI Pro is more stable than XP Prog.
- While attacking MC9S12 series Chips, VVDIProg is faster.
- While reading some EEPROM Chips, Orange are not able to recognize Chips.
- Spared voltage attack function can be used when needed.
- Spared CAN Cable, K-Line Cables Can be used when needed.
Once you buy VVDI Prog programmer, you can get free BMW ISN read function and NEC, MPC, Infineon etc chip continuously update service.
VVDIProg read BMW ISN:
VVDI-PROG PCB Layout:
VVDI Prog Supported chip list
EEPROM
Manufactures | Types | Support | Remark |
ATMEL | AT24CXX | R | |
AT25XXX | R | ||
AT93CX6 | R | ||
BOSCH | B3XX | R | |
B4XX | R | ||
B5XX | R | ||
B58XXX | R | ||
CATALYST | CAT24CXX | R | |
CAT24WXX | R | ||
CAT93CX6[A] | R | ||
EXEL | XL[S]24CXX | R | |
XL[S]93CX6 | R | ||
FAIRCHILD | FM24CXX | R | |
NM24CXX | R | ||
NM93CX6 | R | ||
GRUNDIG | GRXX | R | |
HOLTEK | HT93CX6 | R | |
MICROCHIP | 24AAXX | R | |
24[L]CXX | R | ||
93[L]CX6 | R | ||
93AAX6 | R | ||
MITSUBISHI | M6M800X1 | R | |
SEIKO | S-24CXX | R | |
S-93CX6 | R | ||
ST | D80/D160 | R | Can erase the first 32 bytes |
M35080 | R | Can erase the first 32 bytes | |
NEC | M24CXX | R | |
ST | ST24CXX | R | |
ST24EXX | R | ||
ST24WXX | R | ||
ST25CXX | R | ||
ST25EXX | R | ||
ST95P0X | R |
Note: R means the type is supported, £ means the type will be supported soon in the future
MCU
Manufactures | Types | Support | Remark |
MOTOROLA | MC9S12XEP | R | Can automatically determine D-FLASH/EEE space |
MC9S12XA | R | ||
MC9S12XB | R | ||
MC9S12XD | R | ||
MC9S12XDT | R | ||
MC9S12XDP | R | ||
MC9S12XDQ | R | ||
MC9S12DG | R | ||
MC9S12DT | R | ||
MC9S12P | R | ||
MC9S12H | R | ||
MC9S12HY | £ | ||
MC9S12HA | £ | ||
MC9S12HZ | £ | ||
MC9S12XHZ | £ | ||
MC9S12B | £ | ||
MC9S12GC | £ | ||
MC9S12XS | £ | ||
MC9S12K | £ | ||
MC9S12Q | £ | ||
MC9S12C | £ | ||
MC9S12P | £ | ||
MC9HC(9)08 | £ | ||
ATMEL | ATTINY | £ | |
ATMEGEA | £ | ||
NEC | uPD70F | £ | |
ST | TMS370 | £ |
Note: R means the type is supported, £ means the type will be supported soon in the future.
ECU
Manufactures | Types | Support | Remark |
VAG | MED17.1-TC1796 | £ | |
MED17.11-TC1796 | £ | ||
VAG MEG17.5-TC1766 | £ | ||
VAG MED17.5.1-TC1796 | £ | ||
VAG MED17.5.2-TC1767 | £ | ||
VAG MED17.5.5-TC1766 | £ | ||
VAG MED17.5.20-TC1766 | £ | ||
VAG EDC17 CP14/CP20-TC1796 | £ | ||
VAG EDC17 CP04-TC1796 | £ | ||
VAG EDC17 C46-TC1767 | £ | ||
VAG EDC17 CP24-TC1796 | £ | ||
VAG EDC17 CP44-TC1797 | £ | ||
VAG EDC17 U01-TC1766 | £ | ||
VAG EDC17 U05-TC1796 | £ | ||
VAG/Porsche Siemens Continental SDI 3-TC1796 | £ | ||
BMW | MEVD172(N55) | R | |
MEVD172P(N20) | R | ||
MEVD172G(N55) | R | ||
MEVD172S(N55) | R | ||
MEVD1724(N20) | R | ||
MEVD1725(N13) | R | ||
MEVD1726(N55) | R | ||
MEVD1729(N20) | R | ||
MEVD1728(N63/S63) | R |
Note: R means the type is supported, £ means the type will be supported soon in the future.
How to install VVDI Prog software?
How to update VVDI Prog programmer software and firmware?
Software Upgrade:
Newest version v4.9.5 software download (2020-08-24)
VVDI Prog 4.9.5 Software Download
password:123456
Open VVDI Pro software
Click “Upgrade” tab
Then come to VVDIProg Update menu. You are able to check software version (Tip Information) and firmware version (Device Information).
Firmware Upgrade:
step 1 – connect the vvdi prog device with the usb cable for the computer
step 2 – click on “Start Firmware Upgrade” button to begin update
step 3 – wait for upgrade to complete
VVDI PROG Software Update Plan:
VVDIPROGlatestsoftwareversionV4.9.5 update
* This version DON’t need update firmware
* Fix RH86 bug
* Fix RH850 Series bugs
+ Add VVDI PROG USER MUNUAL 4.9.5 version in Doc folder
+ Add 24AA025, 24AA1025, 24AA1026 options in<1-EEPROM&FLASH-><MICROCHIP>
+ Add FOTON(MC9S12G128) option in <4-IMMOBILIZER-><BAICMOTOR>
+ Add HC05X32(1D69J) option in <4-IMMOBILIZER-><BENZ>
+ Add 300C-46 option in <4-IMMOBILIZER-><CHRYSLER>
+ Add S350-CONTROL-UNIT-PKE option in <4-IMMOBILIZER-><JMC>
+ Add MAXUS-V80 option in <5-DASHBOARD-><SAICMOTOR>
+ Add CAPTU-AIRBAG option in <7-AIRBAG-><RENAULT>
+ Add VOLVO-AIRBAG(2020) option in <7-AIRBAG-><VOLVO>
+ Add C205-CHAIR-MODULE option in <8-OTHERS-><BENZ>
+ Add FAW-BCM(MPC5603BxLQ) option in <8-OTHERS-><FAW>
+ Add BOYUE-PRO(2020)-PEPS-CONTROLLERoption in <8-OTHERS-><GEELY>
+ Add BOYUE-TIRE-PRESSURE-MODULE option in <8-OTHERS-><GEELY>
+ Add VV5-TAILGATE(2017) option in <8-OTHERS-><GREATWALL>
+ Add RFA-SECURED(SPC560B60L3) option in <8-OTHERS-><LANDROVER>
+ Add MAGOTAN-LEFT-FRONT-DOOR-MODULEoption in <8-OTHERS-><VOLKSWAGEN>
+ Add MAGOTAN-REVERSING-RADAR-MODULE option in <8-OTHERS-><VOLKSWAGEN>
VVDIPROGlatestsoftwareversionV4.9.4 update
v4.9.4(2020-05-26)
*ThisversionDON’tneedupdate
firmware
+AddVVDIPROGUSERMANUAL4.9.4
versioninDocfolder
+AddR7F701330optionin
<2-MCU->
+AddFENGJUN-7optionin
<5-DASHBOARD->
+AddTOYOTA-RAV4optionin
<5-DASHBOARD->
+AddBAOJUN-310/560AIRBAG
optionin<7-AIRBAG->
+AddT300AIRBAGoptionin
<7-AIRBAG->
+AddNEWVISIONAIRBAGoptionin
<7-AIRBAG->
+AddBAODIANAIRBAGoptionin
<7-AIRBAG->
+AddLYNKCO-AIRBAGoptionin
<7-AIRBAG->
+AddSRS-VW62optionin
<7-AIRBAG->
+AddAUDI-AC-CONTROLLER(R7F701548)
optionin<8-OTHERS->
+AddFRM-E-SERIES-XDT256
optionin<8-OTHERS->
+AddESCORT-BCMoptionin
<8-OTHERS->
+Add8th-SONATA-AC-CONTROLLER
optionin<8-OTHERS->
+AddSKODA-RADIO-STREAM
optionin<8-OTHERS->
VVDIPROGsoftwareversionV4.9.3 update
v4.9.3 (2020-04-29)
* This version DON’t need update
firmware
* Fix 93Cxx ERASE BUGs
+ Add VVDI PROG USER MUNUAL 4.9.3
version in Doc folder
+ Add S2943 option
in<1-EEPROM&FLASH->
+ Add S2943(CLIP) option
in<1-EEPROM&FLASH->
+ Add EIZ-W906-9S12XDT384,
EIZ-W906-9S12XDP384(ADAPTER),
EIZ-W906-9S12XDP512,
EIZ-W906-9S12XDP512(ADAPTER)
option in <4-IMMOBILIZER->
+ Add CRAFTER-EZS-9S12XDT384,
CRAFTER-EZS-9S12XDT384(ADAPTER),
CRAFTER-EZS-9S12XDP512,
CRAFTER-EZS-9S12XDP512(ADAPTER)
option in <4-IMMOBILIZER->
+ Add ARRIZO3 option in
<5-DASHBOARD->
+ Add FIAT500 option in
<7-AIRBAG->
+ Add GLC260-ELECTRONIC-TAILGATE-UINT(2016),
V260-STEERING-COLUMN(2016) options in
<8-OTHERS->
+ Add BESTURN B90 CONTROL UNIT-PKE(2015)
option in <8-OTHERS->
+ Add CLIO-HFM-MODULE option in
<8-OTHERS->
+ Add PHAETON-REVERSE-RADAR-UINT(2012)
option in <8-OTHERS->
VVDIPROGsoftwareversionV4.9.2 update
v4.9.2 (2020-03-16)
*ThisversionDON’tneedupdate
firmware
+AddVVDIPROGUSERMANUAL4.9.2
versioninDocfolder
+AddSTM32F405RG,
STM32F405OG,
STM32F405VG,
STM32F405ZG,
STM32F405OE,
STM32F407VE,
STM32F407ZE,
STM32F407IE,
STM32F407IGoptionsin
<2-MCU>->
+AddFRM-E-SERIES-XEQ384-READ,
FRM-E-SERIES-XEQ384-WRITE,
FRM-F-SERIES-XEP100-READ,
FRM-F-SERIES-XEP100-WRITE,
FRM-F-SERIES-XET512-READ,
FRM-F-SERIES-XET512-WRITEoptions
in<8-OTHERS->
+AddENVISION—TAILGATE-COMPUTER
optionsin<8-OTHERS->
+AddPHAETON—TAILGATE-COMPUTER(2012)
optionsin<8-OTHERS->
VVDI Prog latest software version V4.6.7 update
v4.6.8 (2018-02-27)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.8 version in Doc folder
+ Add AM29BDD160GBXXE, S29CD016GXXF01, S29CD032GXXF01 options in <1-EEPROM&FLASH>-> (Need PQFP80_FLASH ADPATER)
+ Add M58BW016DBXXT, M58BW016DTXXT, M58BW016FTXXT, M58BW016FBXXT options in <1-EEPROM&FLASH>-> (Need PQFP80_FLASH ADPATER)
+ Add MB90F342, MB90F342A, MB90F342AS, MB90F342CA, MB90F342CAS, MB90F342CE, MB90F342CES, MB90F342E, MB90F342ES, MB90F345A,
MB90F345AS, MB90F345CA, MB90F345CAS, MB90F345CE, MB90F345CES, MB90F345E, MB90F345ES, MB90F346A, MB90F346AS, MB90F346CA,
MB90F346CAS, MB90F346CE, MB90F346CES, MB90F346E, MB90F346ES, MB90F347A, MB90F347AS, MB90F347CA, MB90F347CAS, MB90F347CE,
MB90F347CES, MB90F347E, MB90F347ES, MB90F349A, MB90F349AS, MB90F349CA, MB90F349CAS, MB90F349CE, MB90F349CES, MB90F349E,
MB90F349ES,MB90F387, MB90F387S, MB90F423GA, MB90F423GB, MB90F423GC, MB90F428GA, MB90F428GB, MB90F428GC, MB90F438L,
MB90F439, MB90F439S, MB90F455, MB90F455S, MB90F456, MB90F456S, MB90F457, MB90F457S, MB90F462, MB90F497, MB90F497G, MB90F498G,
MB90F523B, MB90F543, MB90F543G, MB90F543GS, MB90F546G, MB90F546GS, MB90F548G, MB90F549, MB90F549G, MB90F553A, MB90F594A,
MB90F654A, MB90F867A, MB90F867AS, MB90F867E, MB90F867ES, MB96F348A, MB96F348T, MB96F348H, MB96F348C, MB96F348Y, MB96F348R,
MB96F385, MB96F386, MB96F387, MB96F673, MB96F675, MB96F683, MB96F685, MB96F693, MB96F695, MB96F696, MB96F6A5,
MB96F6A6 options in <2-MCU>->
+ Add PANDA_BSI_1L40K option in <4-IMMOBILIZER>->
+ Add RAYCH(2011) option in <5-DASHBOARD>->
+ Add SRS(XC2060M) option in <7-AIRBAG>->
+ Add SRS(XC2060M) option in <7-AIRBAG>->
+ Add WINDOW-MOTOR-0M01N option in <8-OTHER>->
VVDI Prog software version V4.6.7 update
v4.6.7 (2018-01-27)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.7 version in Doc folder
* ESW3 change Read/Write mode
+ Add 25LC010, 25LC020, 25LC040, 25LC080, 25LC160, 25LC320, 25LC640, 25LC128, 25LC256, 25LC512 options in <1-EEPROM&FLASH>->
+ Add TC97010(CLIP) option in <1-EEPROM&FLASH>-><toshiba(clip)>
+ Add MB91F060, MB91F062, MB91F067, MB91F575, MB91F577, MB91F578C, MB91F579C, MB91F591B, MB91F592B, MB91F594B, MB91F596B, MB91F597B,
MB91F599B, MB91F59AC, MB91F59BC options in <2-MCU>->
+ Add MC68HC05E6 option in <2-MCU>-><motorola-mc68hc(7)05>
+ Add W203(AM29F400BB) option in <3-ECU>->
+ Add ME7 option in <3-ECU>->
+ Add IAW 4AC.A4 option in <3-ECU>->
+ Add EIS-W203-1J35D(ADAPTER), EIS-W203-1J74Y(ADAPTER), EIS-W203-2J74Y(ADAPTER), EIS-W203-3J74Y(ADAPTER), EIS-W203-4J74Y(ADAPTER),
EIZ-W209-HC12(ADAPTER), EIZ-W211-HC12(ADAPTER), EIZ-W209-ST12(ADAPTER), EIZ-W211-ST12(ADAPTER), EIZ-W215-ST12(ADAPTER), EIZ-W220-ST12(ADAPTER),
EIZ-W230-ST12(ADAPTER), EIZ-W164-ST12(ADAPTER), EIZ-W169-V1-ST12(ADAPTER), EIZ_VITO_ST12(ADAPTER), EIZ_SPRINGTER(ADAPTER), EIS-W639-0L02M(ADAPTER),
EIS-W639-1L02M(ADAPTER), EIS-W639-3K85K(ADAPTER), EIS-W639-1J35D(ADAPTER), EIS-W639-4J74Y(ADAPTER), HC05E6_REMOTE(0F82B) options in <4-IMMOBILIZER>->
+ Add EWS3—KLINE(0D46J)_READ, EWS3—KLINE(0D46J)_WRITE options in <4-IMMOBILIZER>->
+ Add EPICA_BCM(–2009), SAIL_IMMOBOX(–2009) option in <4-IMMOBILIZER>-> (Support read PASSWORD)
+ Add IX35(2015)(MC9S12XD256) option in <4-IMMOBILIZER>->
+ Add OPEL_IMMOBOX(–2009) option in <4-IMMOBILIZER>-> (Support read PASSWORD)
+ Add JETTA_IMMOBOX(–2008) option in <4-IMMOBILIZER>-> (Support read PASSWORD)
+ LINGZHI_M5(2016)(MC9S12HY64) option in <5-DASHBOARD>->
+ LAVIDA_DASHBOARD(D79F3422) option in <5-DASHBOARD>->
+ VERNA(D70F3421) option in <5-DASHBOARD>->
+ TIGGO5(MB91F594BS) option in <5-DASHBOARD>->
+ PRIDE option in <7-AIRBAG>->
VVDI Prog software version V4.6.5 update
v4.6.6 (2017-12-31)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.6 version in Doc folder
* Fix MC9S12XS series write error problem
* Fix EWS3 ADAPTER R&W error problem
* Fix SPC56AP series write error problem
* Fix D70F3356 write error problem
* Upgrade MB91F061 option, support R&W PFLASH
+ Add TMS370C002A, TMS370C010A, TMS370C012A, (Need TMS370(PLCC28) ADPATER) TMS370C020A, TMS370C022A, TMS370C032A, TMS370C040A,
TMS370C042A, (Need TMS370(PLCC44) ADPATER) TMS370C050A, TMS370C052A, TMS370C056A, TMS370C058A,TMS370C256A (Need TMS370(PLCC68) ADPATER)
options in <2-MCU>->
+ SENOVA-D50-BCM option in <4-IMMOBILIZER>->
+ Add REGAL-KG-MODULE(2014) option in <4-IMMOBILIZER>->
+ Add MEGANE-UCH option in <4-IMMOBILIZER>->
+ Add MG-GT-DASHBOARD(2014) option in <5-DASHBORAD>->
+ Add PTS-W221, TRCM-W221 options in <8-OTHER>->
+ Add X5-LCM option in <8-OTHER>->
VVDI Prog software version V4.6.5 update
v4.6.5 (2017-11-27)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.5 version in Doc folder
+ Update V850 D-Flash format conversion tool, support insert with original 64KB file
* Fix EEPROM CLIP ADAPTER R&W some chips error problem
* Fix EWS3 ADAPTER sometimes insertion check error problem
* Fix 35080/D80 ADAPTER erase some 35080VP first 32 Bytesfailed problem
+ Add MC68HC05B32(0D60J), MC68HC05B32(3G96A), MC68HC705B16(1K20C) options in <2-MCU>-><motorola-mc68hc(7)05> (Need MC68HC05BX ADAPTER)
+ Add MC68HC05X32(0D69J), MC68HC05X32(1D69J), MC68HC05X32(1H52A), MC68HC705X32(0G47V) options in <2-MCU>-><motorola-mc68hc(7)05> (Need MC68HC05X32 ADAPTER)
+ Add MC68HC05E6(0F82B) option in <2-MCU>-><motorola-mc68hc(7)05>
+ Add EMS6104(AM29F400BB), SIMTEC76(29F400BB) options in <3-ECU>->
+ Add SIMOS9.4(AM29F400BB) option in <3-ECU>->
+ Add IRAN(2014-2017)(29F400BB) option in <3-ECU>->
+ Add BJ40-BCM(2016), E150-BCM, HUANSU-S3-BCM options in <4-IMMOBILIZER>->
+ Add SPRINTER-IMMOBOX(2002-2005) option in <4-IMMOBILIZER>->
+ Add BESTURN-B70-BCM(MC9S12XEG128) option in <4-IMMOBILIZER>->
+ Add BSI option in <4-IMMOBILIZER>->
+ Add ELANTRA-KG-MODULE(MC9S12XEG384) option in <4-IMMOBILIZER>->
+ Add IMMOBOX(STM8AF6288) option in <4-IMMOBILIZER>->
+ Add EXCELLEGT(D70F3423) option in <5-DASHBORAD>->
+ Add ARRIZO7-DASHBOARD(2015)option in <5-DASHBORAD>->
+ Add K50-DASHBOARD(2015) option in <5-DASHBORAD>->
+ Add REGAL-SRS(MC9S12XEG384) option in <7-ARIBAG>->
+ Add ASTRA-SRS option in <7-ARIBAG>->
+ Add SRS-VW61 option in <7-ARIBAG>->
+ Add ISM(ST10F269), S-CLASS-W221-FRONT-SAM options in <8-OTHER>->
+ Add SORENTO-IPM option in <8-OTHER>->
+ Add PASSAT-PDC-MODULE, REAR-VIEW-CAMERA(D70F3356), TIGUAN-KG-MODULE(MC9S12XET256) option in <8-OTHER>->
VVDI-Prog v4.6.4 update feature (2017-10-26)
v4.6.4 (2017-10-26)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.4 version in Doc folder
* Fix EEPROM CLIP ADAPTER R&W some chips error problem
+ Add LACROSSE-BCM(2008) option in <4-IMMOBILIZER>-><BUICK>
+ Add IMMOBOX(STM8AF5268),IMMOBOX(STM8AF6268) options in <4-IMMOBILIZER>-><TUNGTHIH>
+ Add ALSVIN-V7(2017) option in<5-DASHBOARD>-><CHANGAN>
+ Add HAVAL-H6 option in<5-DASHBOARD>-><GREATWALL>
+ Add E60-KBM, PDC-MODULE options in <8-OTHER>-><BMW>
VVDI-Prog v4.6.2 update feature (2017-09-29)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.2 version in Doc folder
+ Add S29190(SOP8), S29290(SOP8), S29390(SOP8), S29190(DIP8), S29290(DIP8), S29390(DIP8) options in <8-EEPROM&FLASH>-><SEIKO>
+ Add S29190(SOP8)(CLIP), S29290(SOP8)(CLIP), S29390(SOP8)(CLIP), S29190(DIP8)(CLIP), S29290(DIP8)(CLIP),S29390(DIP8)(CLIP) options in
<8-EEPROM&FLASH>-><SEIKO(CLIP> (Need EEPROM CLIP ADAPTER)
+ Add ME7.4.4-FLASH-AM29F400BB, ME7.4.4-EEPROM-95160, ME7.4.9NG-FLASH-ST10F275, ME7.4.9NG-EEPROM-95320, MG7.9.8 options in <3-ECU>-><BOSCH>
+ Add HYUNDAI(2005-2014)(AM29BDD160GB), HYUNDAI(2005-2014)(29F400BB), SONATA(2005-06)(S29CDO16J), SONATA(2005-06)(29F400BB) options in <3-ECU>-><HYUNDAI>
+ Add KIA(2005-2014)(AM29BDD160GB), KIA(2005-2014)(29F400BB) options in <3-ECU>-><KIA>
+ Add IAW-6LPB(ST10F280) option in <3-ECU>-><MAGNETI>
+ Add 405(ST10F271) option in <3-ECU>-><PEUGEOT>
+ Add RENAULT(2010-2017)(29F400BB) option in <3-ECU>-><RENAULT>
+ Add CNG(2010-2014) option in<3-ECU>-><OTHERS>
+ Add EIZ-W906(ST12) option in <4-IMMOBILIZER>-><BENZ>
+ Add EWS4.X(ADAPTER) option in <4-IMMOBILIZER>-><BMW> (Need EWS4 ADAPTER)
+ Add EXCELLE-GT-BCM(D70F3385), EXCELLE-GT-BCM(D70F3469) options in <4-IMMOBILIZER>-><BUICK>
+ Add CRUZE-BCM(D70F3385) option in <4-IMMOBILIZER>-><CHEVROLET>
+ Add WRANGLER-BCM(2013) option in <4-IMMOBILIZER>-><JEEP>
+ Add EADO(2015) option in <5-DASHBOARD>-><CHANGAN>
+ Add MALIBU(D70F3426) option in <5-DASHBOARD>-><CHEVROLET>
+ Add EMGRAND option in <5-DASHBOARD>-><GEELY>
+ Add REFINE(2017) option in <5-DASHBOARD>-><JAC>
+ Add DELONG option in <5-DASHBOARD>-><SAG>
+ Add ELYSEE-SRS(D70F3624) option in <7-AIRBAG>-><CITROEN>
+ Add 301-SRS(D70F3624) option in <7-AIRBAG>-><PEUGEOT>
+ Add SRS-VW51(MC68HC908AZ60A) option in <7-AIRBAG>-><VOLKSWAGEN>
+ Add GEARBOX(29F200BB) option in <8-OTHERS>-><CITROEN>
+ Add X-TRAIL-PMM option
(Note: EEPROM CLIP ADAPTER and EWS4 adapter will be available in Otc, 2017)
Free Download VVDI Prog V4.6.2 software
https://mega.nz/#!vxBhiJSB!0Ovoe_in3sfWJLhK8fAqrbDX6nXpALt9oQUItKQ45sA
password:123456
VVDI Prog V4.6.1 Update Feature:
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.1version in Doc folder
* Fix MC9S12XS/MC9S12XHY series PFLASH write error problem
* Fix SRS-VW52-V1 diagram
+ Add AT24C01(CLIP),AT24C02(CLIP), AT24C04(CLIP), AT24C08(CLIP), AT24C16(CLIP), AT24C32(CLIP), AT24C64(CLIP), AT24C128(CLIP), AT24C256(CLIP),
AT24C512(CLIP), AT24C1024(CLIP), AT25010(CLIP), AT25020(CLIP), AT25040(CLIP), AT25080(CLIP), AT25160(CLIP), AT25320(CLIP), AT25640(CLIP), AT25128(CLIP),
AT25256(CLIP), AT25512(CLIP), AT93C06[A](CLIP), AT93C46[A](CLIP), AT93C56[A](CLIP), AT93C57[A](CLIP), AT93C66[A](CLIP), AT93C76[A](CLIP),
AT93C86[A](CLIP) options in <1-EEPROM&FLASH>-><atmel(clip)> (Need EEPROM CLIP ADAPTER)
+ Add CAT24C/W01(CLIP), CAT24C/W02(CLIP), CAT24C/W04(CLIP), CAT24C/W08(CLIP), CAT24C/W16(CLIP), CAT24C/W32(CLIP), CAT24C/W64(CLIP), CAT25C128(CLIP),
CAT25C256(CLIP), CAT93C46[A](CLIP), CAT93C56[A](CLIP), CAT93C57[A](CLIP), CAT93C66[A](CLIP), CAT93C76[A](CLIP), CAT93C86[A](CLIP) options in
<1-EEPROM&FLASH>-><catalyst(clip)> (Need EEPROM CLIP ADAPTER)
+ Add XL[S]24C01(CLIP), XL[S]24C02(CLIP), XL[S]24C04(CLIP), XL[S]24C08(CLIP), XL[S]24C16(CLIP), XL[S]93C/LC06(CLIP), XL[S]93C/LC46(CLIP), XL[S]93C/LC56(CLIP),
XL[S]93C/LC66(CLIP) options in <1-EEPROM&FLASH>-><exel(clip)> (Need EEPROM CLIP ADAPTER)
+ Add FM24C02(CLIP), FM24C03(CLIP), FM24C04(CLIP), FM24C08(CLIP), FM24C09(CLIP), FM24C16(CLIP), FM24C17(CLIP), FM93CS06(CLIP), FM93CS46(CLIP), FM93CS56(CLIP),
FM93CS66(CLIP), NM24C02(CLIP), NM24C03(CLIP), NM24C04(CLIP), NM24C05(CLIP), NM24C08(CLIP), NM24C09(CLIP), NM24C16(CLIP), NM24C17(CLIP), NM24U17(CLIP),
NM24C32(CLIP), NM24C65(CLIP), NM93C06(CLIP), NM93C46(CLIP), NM93C56(CLIP), NM93C66(CLIP), NM93C86(CLIP), NM93CS06(CLIP), NM93CS46(CLIP), NM93CS56(CLIP),
NM93CS66(CLIP) options in <1-EEPROM&FLASH>-><fairchild(clip)> (Need EEPROM CLIP ADAPTER)
+ Add 24AA02(CLIP), 24AA04(CLIP), 24AA08(CLIP), 24AA16(CLIP), 24AA164(CLIP), 24AA32(CLIP), 24AA128(CLIP), 24AA256(CLIP), 24C02(CLIP), 24C04(CLIP), 24C32(CLIP),
24LC02(CLIP), 24LC04(CLIP), 24LC08(CLIP), 24LC16(CLIP), 24LC164(CLIP), 24LC32(CLIP), 24LC64(CLIP), 24LC65(CLIP), 24LC128(CLIP), 24LC256(CLIP),
93C/LC/AA46A(CLIP), 93C/LC/AA56A(CLIP), 93C/LC/AA66A(CLIP), 93C/LC/AA76A(CLIP), 93C/LC/AA86A(CLIP), 93C/LC/AA46B(CLIP), 93C/LC/AA56B(CLIP), 93C/LC/AA66B(CLIP),
93C/LC/AA76B(CLIP), 93C/LC/AA86B(CLIP), 93C/LC/AA46C(CLIP), 93C/LC/AA56C(CLIP), 93C/LC/AA66C(CLIP), 93C/LC/AA76C(CLIP), 93C/LC/AA86C(CLIP) options in
<1-EEPROM&FLASH>-><microchip(clip)> (Need EEPROM CLIP ADAPTER)
+ Add M24C01(CLIP), M24C02(CLIP), M24C04(CLIP), M24C08(CLIP), M24C16(CLIP), M24C32(CLIP), M24C64(CLIP), M24C128(CLIP), M24C256(CLIP), M24C512(CLIP),M93C06(CLIP),
M93C46(CLIP), M93C56(CLIP), M93C66(CLIP), M93C76(CLIP), M93C86(CLIP), M95010(CLIP), M95020(CLIP), M95040(CLIP), M95080(CLIP), M95160(CLIP), M95320(CLIP), M95640(CLIP),
M95128(CLIP), M95256(CLIP), M95512(CLIP), ST24C01(CLIP), ST24C02(CLIP), ST24C04(CLIP), ST24C08(CLIP), ST24C16(CLIP), ST24E16(CLIP), ST24E32(CLIP), ST24W02(CLIP),
ST24W04(CLIP), ST24W08(CLIP), ST24W16(CLIP), ST25C01(CLIP), ST25C02(CLIP), ST25C04(CLIP), ST25C08(CLIP), ST25C16(CLIP), ST25E16(CLIP), ST25E32(CLIP), ST93CS56(CLIP),
ST93CS57(CLIP), ST93CS66(CLIP), ST93CS67(CLIP), ST93CS47(CLIP), ST93CS46(CLIP) options in <1-EEPROM&FLASH>-><st(clip)> (Need EEPROM CLIP ADAPTER)
+ Add X24C01(CLIP), X5043(CLIP), X5045(CLIP) options in <1-EEPROM&FLASH>-><st(clip)>(Need EEPROM CLIP ADAPTER)
+ Add ME7.4.5-FLASH-ST10F275, ME7.4.5-EEPROM-95320 options in <3-ECU>->
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>->
+ Add EWS3-KLINE(0D46J) option in <4-IMMOBILIZER>-> (Need EWS3 ADAPTER)
+ Add BCM-XEP100(2009–) option in <4-IMMOBILIZER>->
+ Add LAGUNA-UCT(2006) option in <4-IMMOBILIZER>->
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>->
+ Add BJ40-DASHBORAD, E150-DASHBORAD(2014), EX200-BCM(2016) options in <5-DASHBORAD>->
+ Add EQ-DASHBOARD(2017) option in <5-DASHBORAD>->
+ Add AUTOPLEAD-DASHBOARD(2017) option in <5-DASHBORAD>->
+ Add IEV-DASHBOARD(2017) option in <5-DASHBORAD>->
+ Add BEETLE-DASHBOARD(2005), BEETLE-DASHBOARD(2010) options in <5-DASHBORAD>->
+ Add REGAL-SRS(2014) option in <7-ARIBAG>->
+ Add GOLF7-SRS option in <7-ARIBAG>->
+ Add A6L-C7-EPB-MODULE option in <8-OTHER>->
+ Add 300C-PDC-MODULE(2007–) option in <8-OTHER>->
+ Add MAGOTAN-LEW-MODULE, POLO-J393-EEPROM, TIGUAN-EPB-MODULE options in <8-OTHER>->
VVDI-Prog V4.6.0 (2017-07-26)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.0 version in Doc folder
* Change some RENESAS-V850 chips DFLASH size to 64KB
* Fix GM-BCM3 option
* Fix V850E2 series diagrams
* Change KESSY(2008–) diagram
+ Add V850E-SK3H,V850-SJ3H series diagrams
+ Add NM93CS06, NM93CS46, NM93CS56, NM93CS66, FM93CS06, FM93CS46,FM93CS56,
FM93CS66 options in <1-EEPROM&FLASH>-><FAIRCHILD>
+ Add M93S06, M93S46, M93S56, M93S66, ST93CS46, ST93CS47, ST93CS56, ST93CS57,
ST93CS66, ST93CS67 options in <1-EEPROM&FLASH>-><ST>
+ Add D80(ADAPTER), D160(ADAPTER), M350803(ADAPTER), M350806(ADAPTER), M35080V6(ADAPTER),
M35080VP(ADAPTER) options in <1-EEPROM&FLASH>-><ST>(Need M35080/D80 ADAPTER)
+ Add MC9S12HN64_UNSECURED, MC9S12HZ64_UNSECURED, MC9S12HN64_SECURED,
MC9S12HZ64_SECURED options in <2-MCU>-><MOTOROLA-MC9S12>
+ Add ST72321(R/AR)6, ST72F321(R/AR)6, ST72321(R/AR/J)7, ST72F321(R/AR/J)7, ST72321(R/AR/J)9,
ST72F321(R/AR/J)9, ST72521B(R/AR)6, ST72F521(R/AR)6, ST72521B(M/R/AR)9, ST72F521(M/R/AR)9 options
in <2-MCU>-><ST-ST7>
+ Add SPC5606S option in <2-MCU>-><ST-SPC560XXXX>
+ Add ME7.5.20(ST10F275) option in <3-ECU>-><VOLKSWAGEN>
+ Add KESSY(2008–) option in <4-IMMOBILIZER>-><AUDI>
+ Add KEYLESS-ENTRY-MODULE(2009–)option in <4-IMMOBILIZER>-><GM>
+ Add HAVAL-H9-BCM(D70F3632) option in <4-IMMOBILIZER>-><GREATWALL>
+ Add BCM(2009–) option in <4-IMMOBILIZER>-><LANDROVER>
+ Add XINBAO(MC9S08LG16) option in <5-DASHBORAD>-><CHANGAN>
+ Add CRUZE(D70F3423) option in <5-DASHBORAD>-><CHEVROLET>
+ Add DASHBORAD(2013–)(SPC5604S), DASHBORAD(2013–)(SPC5606S), FIESTA(3L16Y),
FOCUS-C-MAX(2009) options in <5-DASHBORAD>-><FORD>
+ Add BESTURN-B70-SRS(D70F3623) option in <7-ARIBAG>-><FAW>
+ Add ACCORD-SRS(SPC56AP54L3) option in <7-ARIBAG>-><HONDA>
+ Add SRS-VW20(SPC560P50L3) option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add A4L-LEW-MODULE(2013) option in <8-OTHER>-><AUDI>
+ Add EVOQUE-EPB-MODULE(2013) option in <8-OTHER>-><LANDROVER>
https://mega.nz/#!GoYhgIoS!Q13Sw-b6sDxld2mJSn5HunYYHZwg7EdXqF_xa3V_ecw
password:123456
VVDI Prog V4.5.9 (2017-06-28)
* Fix some bugs
+ Add VVDI-PROG USER MUNUAL 4.5.9 version in Doc folder
* Update polish language
+ Update V850 D-Flash format conversion tool
* Fix STM8 series options error
* Fix MED17.1 option error
* Fix V850E-DG3 diagram error
* Fix ME17.9.11.1 diagram error
* Fix BAOJUN630 diagram error
+ Add MPC5606B, MPC5607B, MPC5602D, MPC5606E, MPC5601P, MPC5602S, MPC5604S options
in <2-MCU>-><MOTOROLA-MPC560XXXX>
+ Add SPC560B50B2, SPC560B64L3, SPC560C40L1, SPC560C50L1, SPC56AP54L3, SPC56AP54L5,
SPC56AP60L3, SPC56AP60L5 options in <2-MCU>-><ST-SPC560XXXX>
+ Add MT60(TC1766) option in <3-ECU>-><DELPHI>
+ Add V3 diagram in <3-ECU>-><DELPHI>-><MT80(TC1766)>
+ Add KESSY(2008–) option in <4-IMMOBILIZER>-><VOLKSWAGEN>
(Need to use with VVDI2,support Touareg, Bentley, A8, Cayenne, Phaeton with kessy module (IMMO4 system) after 2008)
+ Add XC60-REVIEW-MIRROR option in <4-IMMOBILIZER>-><VOLVO>
+ Add SENOVA-D70 option in <5-DASHBORAD>-><BAICMOTOR>
+ Add EXCELLEGT option in <5-DASHBORAD>-><BUICK>
+ Add AVEO option in <5-DASHBORAD>-><CHEVROLET>
+ Add FIESTA option in <5-DASHBORAD>-><FORD>
+ Add K5(2017) option in <5-DASHBORAD>-><KIA>
+ Add FREELANDER(2004) option in <5-DASHBORAD>-><LANDROVER>
+ Add MG3(2016) option in <5-DASHBORAD>-><SAICMOTOR>
+ Add EXCELLEGT-SRS option in <7-ARIBAG>-><BUICK>
+ Add ALSVIN-SRS option in <7-ARIBAG>-><CHANGAN>
+ Add CITY-SRS(MPC5604P) option in <7-ARIBAG>-><HONDA>
+ Add 2008-SRS option in <7-ARIBAG>-><PEUGEOT>
+ Add SRS-VW20LE(SPC560P50L3) option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add A4L-LWR-MODULE(2010), A6L-C6-AMP, A8L-AMB-MODULE(2011), ESL-HC08GR16-V2 options in <8-OTHER>-><AUDI>
+ Add 528-SEAT-MODULE option in <8-OTHER>-><BMW>
https://mega.nz/#!LtoxQbAQ!0QPTHKkQF-oojCdoQlhB_b29lXVn4EYICRPlvL8I2MQ
VVDI Prog v4.5.7 (2017-04-21)
* This version DON’t need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.7
version in Doc folder
* Fix some MC68HC(9)08 read error
problem
* Fix PIC12F(16F) diagram error
problem
+ Add TC1762-CAN,
TC1766-CAN options
in <2-MCU>->
+ Add STM8AF5179,
STM8AF5268, STM8AF5269, STM8AF5286, STM8AF5288, STM8AF5289, STM8AF528A, STM8AF52A6, STM8AF52A8, STM8AF52A9, STM8AF52AA, STM8AF6168, STM8AF6213, STM8AF6223, STM8AF6223A, STM8AF6246, STM8AF6248, STM8AF6266, STM8AF6268, STM8AF6269, STM8AF6286, STM8AF6288, STM8AF6289, STM8AF628A, STM8AF62A6, STM8AF62A8, STM8AF62A9, STM8AF62AA, STM8AL3136, STM8AL3138, STM8AL3146, STM8AL3148, STM8AL3166, STM8AL3168, STM8AL3188, STM8AL3189, STM8AL318A, STM8AL31E88, STM8AL31E89, STM8AL31E8A, STM8AL3LE88, STM8AL3LE89, STM8AL3LE8A, STM8AL3L46, STM8AL3L48, STM8AL3L66, STM8AL3L68, STM8AL3L88, STM8AL3L89, STM8AL3L8A, STM8L051F3, STM8L052C6, STM8L052R8, STM8L101F1, STM8L101F2, STM8L101F3, STM8L101G2, STM8L101G3, STM8L101K3, STM8L151C2, STM8L151C3, STM8L151C4, STM8L151C6, STM8L151C8, STM8L151F2, STM8L151F3, STM8L151G2, STM8L151G3, STM8L151G4, STM8L151G6, STM8L151K2, STM8L151K3, STM8L151K4, STM8L151K6, STM8L151M8, STM8L151R6, STM8L151R8, STM8L152C4, STM8L152C6, STM8L152C8, STM8L152K4, STM8L152K6, STM8L152K8, STM8L152M8, STM8L152R6, STM8L152R8, STM8L162R8, STM8L162M8, STM8S003F3, STM8S003K3, STM8S003C6, STM8S003K6, STM8S007C8, STM8S103F2, STM8S103F3, STM8S103K3, STM8L105C4, STM8L105C6, STM8L105K4, STM8L105K6, STM8L105S4, STM8L105S6, STM8S207C6, STM8S207CB, STM8S207K6, STM8S207K8, STM8S207M8, STM8S207MB, STM8S207R6, STM8S207R8, STM8S207RB, STM8S207S6, STM8S207S8, STM8S208C6, STM8S208C8, STM8S208MB, STM8S208R8, STM8S208RB, STM8S903F, STM8S903K options
in <2-MCU>->
+ Add ME17.9.11.1(TC1762) option
in <3-ECU>->
+ Add MED17.1(TC1766) option
in <3-ECU>->
+ Add EIS-W639(1J35D),
EIS-W639(3K85K),
EIS-W639(4J74Y) options
in <4-IMMOBILIZER>->
+ Add JIEFANG-J6-HCS300 option
in <4-IMMOBILIZER>->
* Change JIEFANG-J6-BCM option
(Support up to 5 remotes)
+ Add SENOVA-D60 option
in <5-DASHBORAD>->
+ Add EADO option
in <5-DASHBORAD>->
+ Add TRUMPCHI-GS4 option
in <5-DASHBORAD>->
VVDI Prog 4.5.7 Sofware download
VVDI-Prog Software V4.5.6 Update Feature:
VVDI Prog v4.5.6 (2017-03-21)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.6 version in Doc folder
+ Support operate software while opening the diagram
* Fix MC9S12G192,
MC9S12GA19,
MC9S12G240,
MC9S12GA240 options
PFLASH write error problem
+ Add PIC12F635,
PIC12F683 options
in <2-MCU>->
<MICROCHIP-PIC12F>
+ Add PIC16F631,
PIC16F636,
PIC16F639,
PIC16F677,
PIC16F684,
PIC16F685,
PIC16F687,
PIC16F688,
PIC16F689,
PIC16F690 options
in <2-MCU>->
<MICROCHIP-PIC16F>
+ Add JIEFANG-J6-BCM option
in <4-IMMOBILIZER>-><FAW>
(Need to use with VVDI2)
+ Add FC-OPERATION-UNIT-W221
option in <8-OTHER>-><BENZ>
password: 123456
VVDI Prog Programmer V4.5.5 Update Feature:
* This version DON’t need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.5
version in Doc folder
+ Support operate software while
opening the diagram
* Fix HC908AB32_FLASH,
HC908AS32A_FLASH,
HC908AS60A_FLASH,
HC908AZ32A_FLASH,
HC908AZ60A_FLASH,
HC908AZ60E_FLASH,
MC68HC908LJ24,
MC68HC908LK24 options
write FLASH error problem
in <2-MCU>->
+ Add M35080-OLD-VERSION option
in <1-EEPROM&FLASH>->
+ Add MC9S08SU8_UNSECURED,
MC9S08SU16_UNSECURED options
in <2-MCU>->
+ Add MED17.5.20(TC1766) option
in <3-ECU>->
+ Add GRAND-CHEROKEE-IMMO(0L72A)
option
in <4-IMMOBILIZER>->
+ Add CS35(2016) option
in <5-DASHBORAD>->
+ Add TRUMPCHI-GA6(2015) option
in <5-DASHBORAD>->
+ Add KG-MODULE-W221-OLD,
KG-MODULE-W221-NEW options
in <8-OTHER>->
+ Add F-SERIES-SZL-MODULE option
in <8-OTHER>->
+ Add TRUCK-LOCK-MODULE(2014–)
option in <8-OTHER>->
VVDI Prog V4.5.2 Update Notice:
Original Xhorse VVDI Prog ECU MCU EEPROM programmer released new software version in 2016-11-25.
VVDI PROG V4.5.2 update feature:
v4.5.2 (2016-11-25)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.1 version in Doc folder
+ Add AB28F200B5T(PSOP44),AB28F200B5B(PSOP44),AB28F400B5 T(PSOP44),AB28F400B5B(PSOP44),
AB28F800B5T(PSOP44),AB28F800B5B(PSOP44)options in <1-EEPROM&FLASH>-><INTEL>(Need the TB28FXXX adapter)
+ Add HC908GR4,HC908GR8,HC908LJ12,HC908LJ24, HC908GR4_SECURED, HC908GR8_SECURED, HC908LJ12_SECURED,
HC908LJ24_SECURED options in <2-MCU>-><MOTOROLA-MC69HC(9)08>
+ Add MC9S08JM8_UNSECURED,MC9S08JM16_UNSECURED, MC9S08JM32_UNSECURED, MC9S08JM60_UNSECURED options in <2-MCU>-><MOTOROLA-MC9S08>
+ Add [V850ES/FE3]series: 70F3623 option
[V850ES/FF3]series: 70F3626 option
[V850ES/FG3]series: 70F3627,D70F3629,D70F3630 options
[V850ES/FJ3]series: 70F3631,D70F3632,D70F3633, D70F3634, D70F3635 options
[V850ES/FK3]series: D70F3636,D70F3637,D70F3638 optionsin <2-MCU>-><RENESAS-V850>
+ Add BCM3 option in <4-IMMOBILIZER>-><GM>
+ Add XIAOKANG(2015) option in <5-DASHBORAD>-><DONGFENG>
+ Add SAICMAXUS-RV(2015) option in <5-DASHBORAD>-><SAICMOTOR>
+ Add <7-ARIBAG> option in TYPE
+ Add GL8-SRS(2015) option in <7-ARIBAG>-><BUICK>
+ Add MAKKA-SRS(2015) option in <7-ARIBAG>-><OPEL>
+ Add VW52-SRS-V2 option in <7-ARIBAG>-><VOLKSWAGEN>
VVDIProg V4.5.1 Update Feature:
v4.5.1 (2016-10-24)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.1 version in Doc folder
* Fix MC68HC908 series write FLASH problem
+ Add MB91F037,MB91F061,MB91F062 optionsin <2-MCU>->
+ Add [V850E2/DK4]series: 70F3529 option
[V850E2/FG4]series: 70F3548, D70F3549, D70F3550, D70F4000,D70F4001,D70F4002 options
[V850E2/FJ4]series: 70F3551,D70F3552,D70F3553,D70F3554, D70F4003,D70F4004, D70F4005,D70F4006 options
[V850E2/FK4]series: 70F3555,D70F3556, D70F3557,D70F3558, D70F3592, D70F4007,D70F4008,D70F4009,D70F4010 options
[V850E2/FL4]series: 70F3559,D70F3560,D70F4011,D70F4012 options
[V850E2/FK4-H]series: 70F3561 options
[V850E2/FL4-H]series: 70F3564 options
[V850E2/FE4-L]series: 70F3570, D70F3571,D70F3572 options
[V850E2/FF4-L]series: 70F3573,D70F3574, D70F3575 options
[V850E2/FG4-L]series: 70F3576,D70F3577,D70F3578,D70F3579,D70F3580 options
[V850E2/FJ4-L]series: 70F3582,D70F3583,D70F3584,D70F3585 options in <2-MCU>->
+ Add DISCOVER3-CEM,RANGE-ROVER-SPORT-CEM options in <4-IMMOBILIZER>->
+ Add BIG7-ICU(HC908GZ32) option in <4-IMMOBILIZER>->
+ Add SRS(2016) option in <7-OTHER>->
VVDI Prog V4.5.0 Software Free Download
Password:123456
VVDI-Prog V4.5.0 Update Feature:
v4.5.0 (2016-09-26)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.0 version in Doc folder
* Fix ATMEGAxx8 diagram error problem
* Change D70f3624 diagram(add QFP64 package)
+ Add ATMEGA48P,ATMEGA48PB, ATMEGA88P,ATMEGA88PB, ATMEGA163,ATMEGA164,
ATMEGA164P, ATMEGA168P,ATMEGA168PB, ATMEGA169P,ATMEGA323,ATMEGA324, ATMEGA324P,
ATMEGA324PB, ATMEGA325, ATMEGA325P, ATMEGA3250, ATMEGA3250P, ATMEGA328, ATMEGA328P,
ATMEGA328PB, ATMEGA329, ATMEGA329P,ATMEGA3290, ATMEGA3290P,ATMEGA644, ATMEGA644P,
ATMEGA645, ATMEGA645P, ATMEGA6450, ATMEGA6450P, ATMEGA649, ATMEGA649P, ATMEGA6490,
ATMEGA6490P, ATMEGA103, ATMEGA1284, ATMEGA1284P optionsin <2-MCU>-><ATMEL-ATMEGA_XXXX>
+ Add HC908GZ8,HC908GZ16, HC908GZ32,HC908GZ48,HC908GZ60,HC908GZ8_SECURED,HC9 08GZ16_SECURED,
HC908GZ32_SECURED,HC908GZ48_SECURED,HC908GZ60_SECU RED options in <2-MCU>-><MOTOROLA-MC68HC(9)08>
+ Add MC912DT128_UNSECURED,MC912DT128A_UNSECURED,MC912DT 128P_UNSECURED,MC912DT128_SECURED,
MC912DT128A_SECURED,MC912DT128P_SECURED optionsin <2-MCU>-><MOTOROLA-MC68HC(9)12>
+ Add MT20U2-MC912DT128P option in <3-ECU>-><DELPHI>
+ Add BESTURN-B90-BCM option in <4-IMMOBILIZER>-><FAW>
+ Add FENGGUANG(2016) option in <5-DASHBORAD>-><DONGFENG>
+ Add XC60-HIGH-EQUIPPED(2014) option in <5-DASHBORAD>-><VOLVO>
VVDI-Prog V4.4.9 software free download
Password:123456
VVDI Prog V4.4.9 Update Feature:
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.4.9 version in Doc folder
+ Add ATMEGA48,ATMEGA8,ATMEGA88,ATMEGA16,ATMEGA162,
ATMEGA168,ATMEGA169,ATMEGA32,ATMEGA64,ATMEGA640,AT MEGA128,
ATMEGA1280,ATMEGA1281,ATMEGA2560,ATMEGA2561 optionsin <2-MCU>-><ATMEL-ATMEGA_XXXX>
+ Add XC164CS-16F,XC164CS-32F options in <2-MCU>-><INFINEON-XC164CS>
+ Add PIC18F6520,PIC18F6620,PIC18F6720,PIC18F8520,PIC18F 8620,
PIC18F8720 options in <2-MCU>-><MICROCHIP-PIC18F>
+ Add MODUS-XC164CS-32F option in <3-ECU>-><RENAULT>
+ Add X7(2016) option in <5-DASHBORAD>-><HANTENG>
+ Add HONDA(2015) option in <5-DASHBORAD>-><HONGDA>
+ Add ESL-HC08GR16-V1 option in <7-OTHER>-><AUDI>
+ Add ATCM,RFA-V2 options in <7-OTHER>-><LANDROVER>
+ Add CLIO3-EPS-XC164CS-32F option in <7-OTHER>-><RENAULT>
+ Add CDC-XC164CS-16F option in <7-OTHER>-><SACHS>
+ Add AIRBAG-VW52 option in <7-OTHER>-><VOLKSWAGEN>
Free download VVDI Prog V4.4.8
* This version DON’t need update firmware
* Fix some bugs (write or erase operation prompt device error problem)
VVDI-Prog v4.4.5 update feature (2016-05-25):
* This version DON’t need update firmware
* Fix some bugs
* Fix MC9S12XE seires write
P-FLASH bug
(write BMW FRM bug)
+ Add VVDI PROG USER MUNUAL in
Doc folder
+ Add 12V power output status in
software
+ Add MC9S08LG16_UNSECURED,
MC9S08LG32_UNSECURED,
MC9S08MP12_UNSECURED,
MC9S08MP16_UNSECURED,
MC9S08SC4_UNSECURED,
MC9S08SG4_UNSECURED,
MC9S08SG8_UNSECURED,
MC9S08SG16_UNSECURED,
MC9S08SG32_UNSECURED,
MC9S08SF4_UNSECURED,
MC9S08SV8_UNSECURED,
MC9S08SV16_UNSECURED options
in <2-MCU>-><MOTOROLA-MC9S08>
+ Add MC68HC12BC32_UNSECURED,
MC68HC12BE32_UNSECURED,
MC68HC912B32_UNSECURED,
MC68HC912BC32_UNSECURED,
MC68HC912BD32_UNSECURED,
MC912D60_UNSECURED,
MC912D60A_UNSECURED,
MC912DG128_UNSECURED,
MC912DG128A_UNSECURED,
MC68HC912BD32_SECURED,
MC912D60_SECURED,
MC912D60A_SECURED,
MC912DG128_SECURED,
MC912DG128A_SECURED options
in <2-MCU>->
<MOTOROLA-MC68HC(9)12>
+ Add MC9S12H128_UNSECURED,
MC9S12H256_UNSECURED,
MC9S12H128_SECURED,
MC9S12H256_SECURED options
Mask:(0K78X,1K78X)
MC9S12XF128_UNSECURED,
MC9S12XF256_UNSECURED,
MC9S12XF384_UNSECURED,
MC9S12XF512_UNSECURED,
MC9S12XF128_SECURED,
MC9S12XF256_SECURED,
MC9S12XF384_SECURED,
MC9S12XF512_SECURED options
Mask:(0M64J,1M64J,2M64J)
in <2-MCU>-><MOTOROLA-MC9S12>
+ Add R5F2154XX-RESET-SEC,
R5F21546E,
R5F21547E,
R5F21548E,
R5F2154AE,
R5F2154CE,
R5F21546F,
R5F21547F,
R5F21548F,
R5F2154AF,
R5F2154CF,
R5F21546G,
R5F21547G,
R5F21548G,
R5F2154AG,
R5F2154CG,
R5F21546H,
R5F21547H,
R5F21548H,
R5F2154AH,
R5F2154CH options
in <2-MCU>-><RENESAS-R8C>
+ Add D70F3416,
D70F3417,
D70F3421,
D70F3422,
D70F3423,
D70F3424,
D70F3425,
D70F3426,
D70F3427,
D70F3433,
D70F3610,
D70F3611,
D70F3612,
D70F3613,
D70F3614,
D70F3615,
D70F3616,
D70F3617,
D70F3618,
D70F3619,
D70F3620,
D70F3621,
D70F3622,
D70F3624,
D70F3628,
D70F3634 options
in <2-MCU>-><RENESAS-V850>
+ Add BCM2(D70F3379),
BCM2(D70F3381/3634) options
in <4-IMMOBILIZER>-><AUDI>
+ Add BCM2(D70F3379),
BCM2(D70F3381/3634) options
in <4-IMMOBILIZER>-><VOLKSWAGEN>
+ Add EXCELLE(2010),
EXCELLE(2013-15),
GL8-FIRSTLAND(2007),
LACROSSE(2008) options
in <5-DASHBORAD>-><BUICK>
+ Add YUEXIANG(2014) option
in <5-DASHBORAD>-><CHANGAN>
+ Add FOCUS(2005),
MONDEO-CHIA-X(2009),
S-MAX(2008) options
in <5-DASHBORAD>-><FORD>
+ Add LOBO(2008) option
in <5-DASHBORAD>-><HAFEI>
+ Add FAMILY(2011-13) option
in <5-DASHBORAD>-><HAIMA>
+ Add S-SEIRES option
in <5-DASHBORAD>-><JAGUAR>
+ Add JINBEI(2015) option
in <5-DASHBORAD>-><JINBEI>
+ Add LANDWIND-X8 option
in <5-DASHBORAD>-><JMC>
+ Add XC60(2016) option
in <5-DASHBORAD>-><VOLVO>
+ Add FSV(2010-) option
in <5-DASHBORAD>-><ZHONGHUA>
+ Add SR7 option
in <5-DASHBORAD>-><ZOTYE>
VVDI-Prog V4.4.4 update feature (2016-04-25)
* This version DON’t need update
firmware
* Fix some bugs
* Change some prompt information
* Fix MC9S12 seires some types
write EEPROM error
+ Add upgrade info prompt, when the
new version software upgrade auto
display the update information
+ Add Frequency Set botton in
MC9S12 seires UNSECURED version,
support manual set frequency or
search the right frequency from
MC9S12_BADURATE.cfg in Data folder
(support add frequency parameter)
+ Add Frequency Set botton in
RENESAS-V850 seires, support manual
set frequency or search the right
frequency from V850_BADURATE.cfg
in Data folder
(support add frequency parameter)
+ Add Frequency Set botton in
RENESAS-R5F61XXX seires, support
manual set frequency or search
the right frequency from
R5F61XXX_BADURATE.cfg in Data folder
(support add frequency parameter)
+ Add MC9S08AC8_UNSECURED,
MC9S08AC16_UNSECURED,
MC9S08AC32_UNSECURED,
MC9S08AC48_UNSECURED,
MC9S08AC60_UNSECURED,
MC9S08AC96_UNSECURED,
MC9S08AC128_UNSECURED,
MC9S08AW8_UNSECURED,
MC9S08AW16_UNSECURED,
MC9S08AW32_UNSECURED,
MC9S08AW48_UNSECURED,
MC9S08AW60_UNSECURED,
MC9S08DV16_UNSECURED,
MC9S08DV32_UNSECURED,
MC9S08DV48_UNSECURED,
MC9S08DV60_UNSECURED,
MC9S08DV96_UNSECURED,
MC9S08DV128_UNSECURED,
MC9S08DZ16_UNSECURED,
MC9S08DZ32_UNSECURED,
MC9S08DZ48_UNSECURED,
MC9S08DZ60_UNSECURED,
MC9S08DZ96_UNSECURED,
MC9S08DZ128_UNSECURED,
MC9S08EL16_UNSECURED,
MC9S08EL32_UNSECURED,
MC9S08FL8_UNSECURED,
MC9S08FL16_UNSECURED,
MC9S08GB32_UNSECURED,
MC9S08GB60_UNSECURED,
MC9S08GT16_UNSECURED,
MC9S08GT32_UNSECURED,
MC9S08GT60_UNSECURED,
MC9S08JS8_UNSECURED,
MC9S08JS16_UNSECURED,
MC9S08QA2_UNSECURED,
MC9S08QA4_UNSECURED,
MC9S08QD2_UNSECURED,
MC9S08QD4_UNSECURED,
MC9S08QG4_UNSECURED,
MC9S08QG8_UNSECURED,
MC9S08SE4_UNSECURED,
MC9S08SE8_UNSECURED,
MC9S08SH4_UNSECURED,
MC9S08SH8_UNSECURED,
MC9S08SL8_UNSECURED,
MC9S08SL16_UNSECURED options
in <2-MCU>->
+ Add R5F61723 option
in <2-MCU>->
+ Add QUADROCYCLE(2011) option
in <3-ECU>->
+ Add H2-BCM option
in <4-IMMOBILIZER>->
+ Add BENBEN,
S35,
JINNIUXING,
YUEXIANG options
in <5-DASHBORAD>->
+ Add CAPTIVA(2008) option
in <5-DASHBORAD>->
+ Add VENUCIA-R50(2014),
XIAOKANG(2014) options
in <5-DASHBORAD>->
+ Add BESTURN-B50,
BESTURN-B90(2014),
BESTURN-X80(2013),
VITA(2008) options
in <5-DASHBORAD>->
+ Add FOCUS(09-10) option
in <5-DASHBORAD>->
+ Add C30(2010) option
in <5-DASHBORAD>->
+ Add S5 option
in <5-DASHBORAD>->
+ Add LUXGEN option
in <5-DASHBORAD>->
+ Add QASHQAI(2011) option
in <5-DASHBORAD>->
+ Add BAOJUN730(2015),
ROEWE550,
SGMW-WULINGZHIGUANG options
in <5-DASHBORAD>->
+ Add S40(2006-08),
S40(2010),
XC60(2012) options
in <5-DASHBORAD>->
+ Add V5 option
in <5-DASHBORAD>->
+ Add Z300(2013) option
in <5-DASHBORAD>->
+ Add ISM-W221,
LU-W221,
SAM-W221 options
in <7-OTHER>->
+ Add RFA option
in <7-OTHER>->
+ Add PASSAT-B6-PBCM option
in <7-OTHER>->
VVDIProg v4.4.3 update feature (2016-03-31)
* This version DON’t need update
firmware
+ Add R5F61725 option
in <2-MCU>-><RENESAS>
+ Add MC9S12HZ128_UNSECURED,
MC9S12HZ256_UNSECURED,
MC9S12KG128_UNSECURED,
MC9S12KG256_UNSECURED,
MC9S12KT128_UNSECURED,
MC9S12KT256_UNSECURED,
MC9S12XEA128_UNSECURED,
MC9S12XEG128_UNSECURED,
MC9S12XEA256_UNSECURED,
MC9S12XEG256_UNSECURED,
MC9S12XET256_UNSECURED,
MC9S12XEG384_UNSECURED,
MC9S12XEQ384_UNSECURED,
MC9S12XES384_UNSECURED,
MC9S12XEQ512_UNSECURED,
MC9S12XET512_UNSECURED,
MC9S12XEP768_UNSECURED,
MC9S12XEP100_UNSECURED,
MC9S12XHZ256_UNSECURED,
MC9S12XHZ384_UNSECURED,
MC9S12XHZ512_UNSECURED,
MC9S12HZ128_SECURED,
MC9S12HZ256_SECURED,
MC9S12KG128_SECURED,
MC9S12KG256_SECURED,
MC9S12KT128_SECURED,
MC9S12KT256_SECURED,
MC9S12XEA128_SECURED,
MC9S12XEG128_SECURED,
MC9S12XEA256_SECURED,
MC9S12XEG256_SECURED,
MC9S12XET256_SECURED,
MC9S12XEG384_SECURED,
MC9S12XEQ384_SECURED,
MC9S12XES384_SECURED,
MC9S12XEQ512_SECURED,
MC9S12XET512_SECURED,
MC9S12XEP768_SECURED,
MC9S12XEP100_SECURED,
MC9S12XHZ256_SECURED,
MC9S12XHZ384_SECURED,
MC9S12XHZ512_SECURED diagram
in <2-MCU>-><MOTOROLA>
+ Add SGMW-HONGGUANG option
in <5-DASHBORAD>-><CHERY>
+ Add 315M-IN-CIRCUIT,
315M-CHIP,
434M-IN-CIRCUIT,
434M-CHIP,
868M-IN-CIRCUIT,
868M-CHIP options in
<6-REMOTE>-><BMW-E-SERIES-RENEW>
Free download VVDI-Prog V4.4.3 software
https://mega.nz/#!C59zDJKQ!F9-c40k4C1ZUTzghQmDNW7B-Et8HPr5QO3AV17jW2_8
VVDI-Prog v4.4.2 updated features:
* This version DON’t need update
firmware
+ Add MC9S12A64_UNSECURED,
MC9S12A128_UNSECURED,
MC9S12A256_UNSECURED,
MC9S12D64_UNSECURED,
MC9S12DB128_UNSECURED,
MC9S12DG128_UNSECURED,
MC9S12DG256_UNSECURED,
MC9S12DJ64_UNSECURED,
MC9S12DJ128_UNSECURED,
MC9S12DJ256_UNSECURED,
MC9S12DP256_UNSECURED,
MC9S12DT128_UNSECURED,
MC9S12DT256_UNSECURED,
MC9S12GN16_UNSECURED,
MC9S12GNA16_UNSECURED,
MC9S12GN32_UNSECURED,
MC9S12GNA32_UNSECURED,
MC9S12G48_UNSECURED,
MC9S12GA48_UNSECURED,
MC9S12GN48_UNSECURED,
MC9S12G64_UNSECURED,
MC9S12GA64_UNSECURED,
MC9S12G96_UNSECURED,
MC9S12GA96_UNSECURED,
MC9S12G128_UNSECURED,
MC9S12GA128_UNSECURED,
MC9S12G192_UNSECURED,
MC9S12GA192_UNSECURED,
MC9S12G240_UNSECURED,
MC9S12GA240_UNSECURED,
MC9S12XA128_UNSECURED,
MC9S12XA256_UNSECURED,
MC9S12XDA512_UNSECURED,
MC9S12XB128_UNSECURED,
MC9S12XB256_UNSECURED,
MC9S12XD64_UNSECURED,
MC9S12XD128_UNSECURED,
MC9S12XD256_UNSECURED,
MC9S12XDG128_UNSECURED,
MC9S12XDP512_UNSECURED,
MC9S12XDQ256_UNSECURED,
MC9S12XDT256_UNSECURED,
MC9S12XDT384_UNSECURED,
MC9S12XDT512_UNSECURED,
MC9S12A64_SECURED,
MC9S12A128_SECURED,
MC9S12A256_SECURED,
MC9S12D64_SECURED,
MC9S12DJ64_SECURED,
MC9S12DB128_SECURED,
MC9S12DJ128_SECURED,
MC9S12DG128_SECURED,
MC9S12DT128_SECURED,
MC9S12DG256_SECURED,
MC9S12DJ256_SECURED,
MC9S12DP256_SECURED,
MC9S12DT256_SECURED,
MC9S12XA128_SECURED,
MC9S12XA256_SECURED,
MC9S12XDA512_SECURED,
MC9S12XB128_SECURED,
MC9S12XB256_SECURED,
MC9S12XD64_SECURED,
MC9S12XD128_SECURED,
MC9S12XDG128_SECURED,
MC9S12XD256_SECURED,
MC9S12XDQ256_SECURED,
MC9S12XDT256_SECURED,
MC9S12XDT384_SECURED,
MC9S12XDP512_SECURED,
MC9S12XDT512_SECURED diagram
in <2-MCU>-><MOTOROLA>
+ Add [V850E/Ix3] seires:
D70F3451,
D70F3452,
D70F3453,
D70F3454 diagram
[V850ES/Jx3] seires:
D70F3739,
D70F3740,
D70F3741,
D70F3742,
D70F3743,
D70F3744,
D70F3745,
D70F3746 diagram
[V850ES/Jx3-E] seires:
D70F3778,
D70F3779,
D70F3780,
D70F3781,
D70F3782,
D70F3783,
D70F3784,
D70F3785,
D70F3786,
D70F3826,
D70F3827,
D70F3828,
D70F3829,
D70F3834,
D70F3835,
D70F3836,
D70F3837 diagram
[SPECIAL TYPE] seires:
D70F3469 diagram
in <2-MCU>-><RENESAS>
+ Add A4L-BCM(1L15Y) option
in <4-IMMOBILIZER>-><AUDI>
+ Add CAS4-5M48H-UNLOCK,
CAS4-1N35H-UNLOCK options
in <4-IMMOBILIZER>-><BMW>
+ Add VECTRA(2004-2008) option
in <4-IMMOBILIZER>-><OPEL>
+ Add BCM-2M25J-UNLOCK,
BCM-5M48H-UNLOCK,
BCM-1N35H-UNLOCK options
in <4-IMMOBILIZER>-><PORSCHE>
+ Add NEW-QQ option
in <5-DASHBORAD>-><CHERY>
+ Add KUGA-3L16Y option
in <5-DASHBORAD>-><FORD>
* Fix some bug
————————————-
VVDI Prog programmer v4.4.1 (2016-03-17)
* This version need update
firmware
The latest version is 2.0.0
The new version will support
more versions of driver
* Get this version software in
4.4.0 version Upgrade option
+ Add MC9S12C32_UNSECURED,
MC9S12C64_UNSECURED,
MC9S12C96_UNSECURED,
MC9S12C128_UNSECURED,
MC9S12GC16_UNSECURED,
MC9S12GC32_UNSECURED,
MC9S12GC64_UNSECURED,
MC9S12GC96_UNSECURED,
MC9S12GC128_UNSECURED,
MC9S12GC16_SECURED,
MC9S12GC32_SECURED,
MC9S12GC64_SECURED,
MC9S12GC96_SECURED,
MC9S12GC128_SECURED options
in <2-MCU>-><MOTOROLA>
Mask:(0M66G,1M34C,1L45J,2L45J)
+ Add [V850ES/Sx3]series:
D70F3231,
D70F3232,
D70F3233,
D70F3234,
D70F3235,
D70F3236,
D70F3237,
D70F3238,
D70F3239 options
[V850E/RS1]series:
D70F3402,
D70F3403,
D70F3403A options
[V850E/Ix3]series:
D70F3451,
D70F3452,
D70F3453,
D70F3454 options
[V850E/RG3]series:
D70F3464,
D70F3465,
D70F3466,
D70F3470,
D70F3471,
D70F3472 options
[V850ES/Jx2]series:
D70F3715,
D70F3716,
D70F3717,
D70F3718,
D70F3719,
D70F3720,
D70F3721,
D70F3722,
D70F3723,
D70F3724 options
[V850ES/Jx3]series:
D70F3739,
D70F3740,
D70F3741,
D70F3742,
D70F3743,
D70F3744,
D70F3745,
D70F3746 options
[SPECIAL TYPE]series:
D70F3469 options
[V850ES/Jx3-E]series:
D70F3778,
D70F3779,
D70F3780,
D70F3781,
D70F3782,
D70F3783,
D70F3784,
D70F3785,
D70F3786,
D70F3826,
D70F3827,
D70F3828,
D70F3829,
D70F3834,
D70F3835,
D70F3836,
D70F3837 options
in <2-MCU>-><RENESAS>
+ Add the OPBT0 area in
<2-MCU>-><RENESAS> :
D70F3522,
D70F3523,
D70F3524,
D70F3525,
D70F3526,
D70F3529,
D70F3532,
D70F3535,
D70F3536,
D70F3537,
D70F4177,
D70F4178,
D70F4179,
D70F4180 options
The OPBT0 area is the chip config
data area
+ Add EIS-W220(HC08) option
in <4-IMMOBILIZER>-><BENZ>
+ Add IMMOBILIZER-0J66D,
IMMOBILIZER-0L72A,
IMMOBILIZER-1H56A,
IMMOBILIZER-1K59H options
in <4-IMMOBILIZER>-><FIAT>
+ Add SMARTKEY-0L01Y option
in <4-IMMOBILIZER>-><JAGUAR>
+ Add BCM-1N35H-BACKUP,
BCM-1N35H-R/W/UNLOCK options
in <4-IMMOBILIZER>-><PORSCHE>
+ Add H5-1M80F option in
<5-DASHBORAD>-><GREATWALL>
+ Add XC60(2014) option in
<5-DASHBORAD>-><VOLVO>
+ Add FRM-XEQ384 option
in <7-OTHER>-><BMW>
+ Add auto backup the security area
1K Bytes data function in
MC9S12XE series chip options when
select unlock the chip, the backup
data will be saved in “backup”
folder and named with time info
+ Add auto detect firmware version
function. if the firmware
version too low, the software
will prompt to upgrade the
firmware
* Fix some bug
VVDIProg4.4.0 (2016-03-07)
* This version DOESN’t need update firmware
* Add the Download Link in Upgrade option, click it and get the last version software!!!
* Change the diagram interface
+ Add MC9S12C32_SECURED,MC9S12C64_SECURED,MC9S12C96_SECURED,MC9S12C128_SECURED in <2-MCU>->
Mask:(0M66G,1M34C,1L45J,2L45J)
+ Add EIZ-W164(ST12),EIZ-W215(ST12),EIZ-W221(ST12),EIZ-VANEO(ST12) options in <4-IMMOBILIZER>->
+ Add CAPTIVA(2011) option in<5-DASHBORAD>->
+ Add BAOJUN330 option in<5-DASHBORAD>->
+ Add C70(2011) option in <5-DASHBORAD>->
VVDIProg V4.3.1 (2016-01-27)
* This version DOESN’t need update firmware
+ Add MC9S12GN16_UNSECURED,
MC9S12GNA16_UNSECURED,
MC9S12GN32_UNSECURED,
MC9S12GNA32_UNSECURED,
MC9S12G48_UNSECURED,
MC9S12GA48_UNSECURED,
MC9S12GN48_UNSECURED,
MC9S12G64_UNSECURED,
MC9S12GA64_UNSECURED,
MC9S12G96_UNSECURED,
MC9S12GA96_UNSECURED,
MC9S12G128_UNSECURED,
MC9S12GA128_UNSECURED,
MC9S12G192_UNSECURED,
MC9S12GA192_UNSECURED,
MC9S12G240_UNSECURED,
MC9S12GA240_UNSECURED options
Mask:(0N95B,0N51A,0N75C,1N75C,
0N48A,1N48A)
MC9S12HA32_UNSECURED,
MC9S12HA48_UNSECURED,
MC9S12HA64_UNSECURED,
MC9S12HY32_UNSECURED,
MC9S12HY48_UNSECURED,
MC9S12HY64_UNSECURED options
Mask:(0M34S)
MC9S12P32_UNSECURED,
MC9S12P64_UNSECURED,
MC9S12P96_UNSECURED,
MC9S12P128_UNSECURED options
Mask:(0M01N)
MC9S12XEA128_UNSECURED,
MC9S12XEG128_UNSECURED,
MC9S12XEA128_SECURED,
MC9S12XEG128_SECURED options
Mask:(1M53J,2M53J,0N36H,1N36H)
MC9S12XHY128_UNSECURED,
MC9S12XHY256_UNSECURED options
Mask:(0M23Y)
MC9S12XS64_UNSECURED,
MC9S12XS128_UNSECURED,
MC9S12XS256_UNSECURED options
Mask:(0M04M,1M04M,0M05M) in <2-MCU>->
+ Add MC9S12XE_UNLOCK option in <2-MCU>->
(Backup all data before use it)
+ Add ME20U2-XET256-BACKUP,
ME20U2-XET512-BACKUP,
MT22-XEP768-BACKUP,
MT60-XEP768-BACKUP options in <3-ECU>->
+ Add the 12V power adaptor status in information dialog
VVDI PROG V4.3.0 (2016-01-16)
* This version DOESN’t need update firmware
+ Add MC9S12XHZ256_UNSECURED,
MC9S12XHZ384_UNSECURED,
MC9S12XHZ512_UNSECURED,
MC9S12XHZ256_SECURED,
MC9S12XHZ384_SECURED,
MC9S12XHZ512_SECURED options
in <4-IMMOBILIZER>->Mask:(0M80F,1M80F)
+ Add [V850ES/Sx3]series:
D70F3333,
D70F3334,
D70F3335,
D70F3336,
D70F3340,
D70F3341,
D70F3342,
D70F3343,
D70F3350,
D70F3351,
D70F3352,
D70F3353,
D70F3344,
D70F3345,
D70F3346,
D70F3347,
D70F3348,
D70F3354,
D70F3355,
D70F3356,
D70F3357,
D70F3358,
D70F3364,
D70F3365,
D70F3366,
D70F3367,
D70F3368 options
[V850ES/Fx3]series:
D70F3370A,
D70F3371,
D70F3372,
D70F3373,
D70F3374,
D70F3375,
D70F3376A,
D70F3377A,
D70F3378,
D70F3379,
D70F3380,
D70F3381,
D70F3382,
D70F3383,
D70F3384,
D70F3385 options
[V850ES/Hx2]series:
D70F3700,
D70F3701,
D70F3702,
D70F3703,
D70F3704,
D70F3706,
D70F3707,
D70F3709,
D70F3710,
D70F3711,
D70F3712 options
[V850E2/Fx4-G]series:
D70F4177,
D70F4178,
D70F4179,
D70F4180 options
in <2-MCU>->
+ Add EIZ-W220(ST12)
in <4-IMMOBILIZER>->
+ Add ORIGINAL-315M-IN-CIRCUIT,
ORIGINAL-315M-CHIP,
ORIGINAL-868M-IN-CIRCUIT,
ORIGINAL-868M-CHIP options in
<6-REMOTE>->
* Modify the EXCELLE(2013–)BCM,
EXCELLE-GT(2013–)BCM,
EXCELLE(2014) options in
<4-IMMOBILIZER>->:
Remove the D-FLASH option
* Modify the CAS4-5M48H-R/W/UNLOCK,
CAS4-1N35H-R/W/UNLOCK options
in <4-IMMOBILIZER>->:
Autoset the D-FLASH partition
size as 32K while writing the
D-FLASH data
VVDI PROG V4.1.4 (2015-12-11)
* This version DOESN’t need to update firmware
* Fix when the partition size information error in MC9S12XE series chips manual set the partition size function error problem
VVDI PROG V4.1.3 (2015-12-11)
* This version DOESN’t need to update firmware
+ Add PA28F200B5T(PSOP44),
PA28F200B5B(PSOP44),
PA28F200BVT(PSOP44),
PA28F200BVB(PSOP44),
PA28F200BXT(PSOP44),
PA28F200BXB(PSOP44),
PA28F400B5T(PSOP44),
PA28F400B5B(PSOP44),
PA28F400BVT(PSOP44),
PA28F400BVB(PSOP44),
PA28F400BXT(PSOP44),
PA28F400BXB(PSOP44),
PA28F800B5T(PSOP44),
PA28F800B5B(PSOP44),
PA28F800BVT(PSOP44),
PA28F800BVB(PSOP44),
PA28F800BXT(PSOP44),
PA28F800BXB(PSOP44),
TB28F200B5T(PSOP44),
TB28F200B5B(PSOP44),
TB28F200BVT(PSOP44),
TB28F200BVB(PSOP44),
TB28F200BXT(PSOP44),
TB28F200BXB(PSOP44),
TB28F400B5T(PSOP44),
TB28F400B5B(PSOP44),
TB28F400BVT(PSOP44),
TB28F400BVB(PSOP44),
TB28F400BXT(PSOP44),
TB28F400BXB(PSOP44),
TB28F800B5T(PSOP44),
TB28F800B5B(PSOP44),
TB28F800BVT(PSOP44),
TB28F800BVB(PSOP44),
TB28F800BXT(PSOP44),
TB28F800BXB(PSOP44)options in <1-EEPROM&FLASH>->(Need the TB28FXXX adapter)
+ Add XP8000E option in <3-ECU>->
+ Add BCM-XEQ384 option in <4-IMMOBILIZER>->
+ Add Laguna BCM(2010–)option in <4-IMMOBILIZER>->
+ Add EXCELLE(2011–)(3L16Y)option in <5-DASHBORAD>->
* Fix the MC9S12XE series”read partition” software bug
* Change the default connection diagram size to 50%
VVDI PROG V4.1.2 (2015-11-27)
* This version DoesN’t need to update firmware
+ Add MC9S12A64_UNSECURED
MC9S12D64_UNSECURED
MC9S12DJ64_UNSECURED
MC9S12A128_UNSECURED
MC9S12DB128_UNSECURED
MC9S12DG128_UNSECURED
MC9S12DJ128_UNSECURED
MC9S12DT128_UNSECURED
MC9S12HZ128_UNSECURED
MC9S12KG128_UNSECURED
MC9S12KT128_UNSECURED
MC9S12A256_UNSECURED
MC9S12DG256_UNSECURED
MC9S12DJ256_UNSECURED
MC9S12DP256_UNSECURED
MC9S12DT256_UNSECURED
MC9S12HZ256_UNSECURED
MC9S12KG256_UNSECURED
MC9S12KT256_UNSECURED
MC9S12XA128_UNSECURED
MC9S12XB128_UNSECURED
MC9S12XD128_UNSECURED
MC9S12XDG128_UNSECURED
MC9S12XA256_UNSECURED
MC9S12XB256_UNSECURED
MC9S12XD256_UNSECURED
MC9S12XDQ256_UNSECURED
MC9S12XDT256_UNSECURED
MC9S12XDT384_UNSECURED
MC9S12XDA512_UNSECURED
MC9S12XDP512_UNSECURED
MC9S12XDT512_UNSECURED options in <2-MCU>->, support auto detect the clk frequency,read/write the unsecured chip with standard BDM interface
+ Add MC9S12XA128,MC9S12XB128,MC9S12XD128,MC9S12XDG128 options in <2-MCU>->Mask:(0M42E,1M42E,2M42E)
+ Add MC9S12XA256,MC9S12XB256,MC9S12XD256,MC9S12XDQ256,MC9S12XDT256 options in <2-MCU>->Mask:(0M84E,1M84E)
+ Add BCM-XDT384,BCM-XEG384 options in <4-IMMOBILIZER>->
+ Add BCM-XDT384,BCM-XEG384 options in <4-IMMOBILIZER>->
+ Add BCM-XDT384,BCM-XEG384 options in <4-IMMOBILIZER>->
+ Add EXCELLE(2013–)BCM,EXCELLE-GT(2013–)BCM options in <4-IMMOBILIZER>->
+ Add MG7 option in <4-IMMOBILIZER>->
+ Add EIZ-SPRINTER(2015–) option in <4-IMMOBILIZER>->
+ Add ZAFIRA-DG128,ASTRA-DG128 options in <4-IMMOBILIZER>->
VVDI PROG V4.1.1 (2015-11-19)
* This version Doesn’t need to update firmware
+ Add Delphi ECU MT20U2-2L33V option in <3-ECU>->
+ Add NEW SAIL BCM option in <4-IMMOBILIZER>->
+ Add ROEWE750 immobox option in <4-IMMOBILIZER>->
+ Add EXCELLE 2014 option in<5-DASHBORAD>->
* Fix display problem while check failure
VVDI PROG 4.1.0 (2015-11-13)
* The need to upgrade the firmware upgrade
+ <2- SCM> – option to increase
MC9S12XEA256 unencrypted,
MC9S12XEG256 unencrypted,
MC9S12XET256 unencrypted,
MC9S12XEG384 unencrypted,
MC9S12XEQ384 unencrypted,
MC9S12XES384 unencrypted,
MC9S12XEQ512 unencrypted,
MC9S12XET512 unencrypted,
MC9S12XEP768 unencrypted,
MC9S12XEP100 unencrypted Options
It supports automatic clock frequency judgment,
Supports four- read unencrypted chip
+ <3-ECU> – increase ME20U2-XET256, ME20U2-XET512 Options
+ <3-ECU> – increase MT22-XEP768, MT60-XEP768 Options
+ <4- theft> – option to increase CAS3-2K79X, CAS3-0L01Y,CAS3 + (0L15Y), CAS3 + (0M23S) Options
* Fixed Shanghai SIIC Transportation Security boxes given problem
V3.8.0 VVDI PROG Programmer Update Information:
V3.8.0 (2015-09-22)
* This version DOESN’t need to update firmware
+ Add 2L33V, 3L15Y R/W function (The only equipment can R/W except original equipment)
+ Add MC9S12HZ128, MC9S12HZ256, MC9S12KG128, MC9S12KG256, MC9S12KT128, MC9S12KT256 options in <2-MCU>–>Mask:(2L16Y,3L16Y,0L74N,1L74N,2L14N,3L74N,4L74N,5L74N,0L33V,1L33V,2L33V,3L33V,0M17D)
+ Add SIEMENS VDO IMMOBILIZER (0L72A_E/1K59H_E)in <4-IMMOBILIZER>options
+ Add “CAS4-1N35H-BACKUP”,”CAS4-1N35H-R/W” options in <4-IMMOBILIZER>–>
+ Add CHERY E5 option in<5-DASHBORAD>
+ Add tips about erase confirmation
* Change Great Wall immobox connection diagram
* Fix the English Version display problem
V3.6.0 (2015-09-15)
* This version DOESN’t need update firmware
+ Add SIEMENS/STEC IMMOBILIZER in<4-IMMOBILIZER>(0L07H/0L59X/0L72A/3K59G)
+ Add BMW EWS4.X in <4-IMMOBILIZER>
+ Add FORD BCM 7S7T in <4-IMMOBILIZER>
+ Add MC9S12XDT384 option in <2-MCU>->, support 0L86D/1L86D/2L86D/3L86D/4L86D/0M89C) options
* Fix MC9S12xx64 Crack/Read/Write function
V3.4.0 (2015-09-10)
* This version DOESN’T need update firmware
+ Add Porsche BCM (1L15Y/2M25J/5M48H) options
+ Add MC9S12XEQ512,MC9S12XET512 options in <2-MCU>–>Motorola
+ Add BENZ EIS-W203 in <4-IMMOBILIZER>
* Fix some display BUGs in English Version
* Change the name of upgrade button as “Start Firmware Upgrade”
* Change the Voltage name as “VCC”,”VPP”