Problem:
I have problem with the xhorse key tool MAX in 3.2.1.When I try to use the Immo Data Tool function and select SuperChip during the transponder selection process, I receive the following message: “Not detected VVDI super chip! – Error: 00″
I’ve reset the device and reinstalled the updates, but that hasn’t fixed the problem.
Solution:
Xhorse releases new firmware 2.0.5 on key tool max/pro. Update firmware and try again.
It is best to put the chip into the small hole next to the coil for identification.
If still fails after updating firmware, change another super chip. It can be a faulty chip.