How to test Clone transponder ID name and Make CS Key with VVDI2

Question before entering:

BCM PQ25 Max3 H81 074

Tried to make just glass chip to car with VVDI2 VAG, could not start vehicle, I guess that should of been clue it was not possible instead of trying to order proper key…

Kessey is PQ35 maybe not possible yet.

Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H02 1104
Serial number:
Coding: 000007
Shop #: WSC 00066 790 00318
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
VCID: 6A980AC98D993C1634-803E

Address 2B: Steer. Col. Lock (J764) Labels:| 5K0-905-861.clb
Part No SW: 5K0 905 861 D HW: 5K0 905 861 D
Component: ELV-PQ35 H22 0240
Revision: 00000000 Serial number: 16000092728010
Coding: 4900000000000000
Shop #: WSC 00066 790 00318
ASAM Dataset: EV_ELVMarquMPVW36X A01001
VCID: 312ADDA560CF8FCE35-8064

Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb
Part No SW: 5C6 920 976 D HW: 5C6 920 976 D
Component: KOMBI H02 1104
Serial number: 00000000000000
Coding: 221A010000
Shop #: WSC 00066 790 00318
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05733
ROD: EV_Kombi_UDS_VDD_RM09_004_VW25.rod
VCID: 3326D7AD9AD3BDDE47-8066

Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 190 B HW: 7E0 937 190
Component: BCM PQ25 Max3 H81 0744

Address 05: Acc/Start Auth. (J518) Labels:| 5K0-959-434.clb
Part No SW: 5K0 959 434 G HW: 5K0 959 434
Component: VWKESSYPQ35GP 092 1305
Revision: 00092000 Serial number: 0405857797
Coding: 032C0C
Shop #: WSC 00066 000 00293
ASAM Dataset: EV_KESSYPQ35G A02717
VCID: 393AE585B8BF478E8D-806C

I am able to log into Cluster, I am able to pre code, but can not start car with chip made.



Xhorse expert solution:

Test Clone transponder ID name and make cs key

Test copy ID transponder in “transponder programmer” and next in “vvdi vag” cluster options “make dealer key”



ID48 Chip for XHORSE VVDI2 48 Transponder Copier 10pcs/lot

Many thanks to LauAlf  from DK.