Xhorse VVDI MLB Tool updated MQB48 NEC35XX immo data collection function recently. Follow the steps below to update your VVDI MLB Tool firmware to use MQB48 adapter.
Xhorse VVDI MLB Tool V2.0.0.0 Adds MQB48 NEC35XX Immo Data Collection
The MQB48 adapter comes with solder wires and an enhanced version replacement chip.
Remove 4 screws on the back of the MLB tool and open the shell.
Remove 2 screws on the main board and check out the other side.
This is the front of the main board.
Replace this chip using the enhanced replacement chip in the package.
After replacing the chip, reinstall the VVDI MLB Tool.
Then you can use the MQB48 adapter to collect immo data.
NOTE:
The MQB48 adapter has strict power supply requirements during data collection. Use two separate USB cables to power the MLB main unit and the MQB48 collector. Do not use charging adapters.
The MLB main unit does not require 12V power.
