The upgraded version Xhorse Condor XC-002 Pro manual key cutting will duplicate dimple, double sided, single sided, 4 track external, 2 track external, 4 track internal, channel track keys. Here we will show how to cut a dimple key with condor xc-002 pro.
1. Insert the internal dimple probe and cutters
2. Insert the original key and the blank key using a shim
3. Rotate the knob to standard mode
4. Calibration. Follow the direction of the light until the middle light turns green
Make sure the clamp is in the corresponding position.
Turn on the cutter switch.
5. Duplicate the key
Press down the main handle to duplicate the key.
Turn off the switch after finishing one side cutting.
Clip the key and continue to cut the other side.
After finishing cutting the other side, turn off the switch and clean up.
6. Insert the dimple probe and cutter (external) to Xhorse Condor XC 002 pro.
Replace the internal dimple probe and cutter with external ones.
7. Switch the konb to dimple mode
8. Insert the keys
9. Finish the calibration.
Clamp the keys and finish calibration.
10. Duplicate the key
Turn on the cutter switch to cut key.
After finishing one side, turn off the switch.
Clip the key and continue to cut the other side.
After finishing cutting the other side, turn off the switch and clean up.
Now we have a working dimple key.
