How to erase and add a smart key for your Toyota vehicle using the VVDI Key Tools Max and Xhorse FT-OBD tool. This is a step-by-step guide on how to program a Toyota Camry smart key using the Mini FT tool. You can also run App on a mobile phone instead of key tool max. The Xhorse FT-Mini OBD tool is a Toyota specific tool that can be used to program smart keys for a variety of Toyota models, including the Toyota Camry, Sequoia, RAV4, and 4Runner up to 2023. We will demonstrate how to use the Xhorse FT-OBD tool to complete the programming process. With these tools, you’ll be able to delete and add smart keys with ease.
Take a example of Camry 2015 smart key.
Select IMMO Programming- Select from model- Camry- KeylessGo- 2013-2017 Type 1(8A-Page P4 88)
If all keys lost, you need to perform all these steps.
Step 1: Read EEPROM data
Step 2: Generate emergency key
Step 3: Add keys
Here just add a spare key, so choose Adding Keys.
Select Clear smart keys.
Turn the ignition to ON position.
Xhorse FT OBD Tool detects that 1 key was registered.
Touch the ignition with a registered key within 30s.
Erase key successfully.
Select Add smart keys
Turn the ignition to ON position.
Keep the ignition switch with a registered key with the marked surface within 30s.
Key detected. prgramming…
Keep the key touching the igntion switch.
Register a new key successfully.
Test the new key and remote control.
Check:
https://www.vvdishop.com/service/how-to-bine-xhorse-ft-mini-obd-tool.html