YOU DO NOT NEED THE SHIM FOR THE Xhorse DOLPHIN XP-005L.
The new M5 clamp allows you to do it without it.
Cut By Bitting>TOY40>TOY 40 Remark: Emergency Key (One Sided Key)
You have to type the Bitting acquired by code. Choose between 4, 6 & 8 bitting
You can also do it under “Universal Duplication”, no issues at all
If you break probes when using the universal key dulpication function, it is usually user fault.
The probe works by electrical signal. when the metal probe touched the metal key an electrical signal is passed from probe to key, and the probe stops, if the probe does not stop and breaks then the electrical signal did NOT transfer from probe to key. CLEAN YOUR KEYS WITH A WIRE BRUSH!!!
You can put anything metal in the clamp and the probe will stop when it touches it. UNLESS ITS DIRTY!!
so clean the key with a wire brush every single time you decode a key, period!! A $2 wire brush will save u time, money, aggravation.
You need to Clean the probe too. they tend to get a little corrosion forming from moisture. so take care of the machine and you won’t have any issues.