Here are the tips to cut shoulder stop keys on the Xhorse Condor or Dolphin key cutting machines.
Definitely easier to use it than to eyeball it. We are going to show you how to use the shoulder stop with it.
The shoulder stop has a little lip on it and that little lip actually fits into that groove and that actually acts as your shoulder stop.
We are going to cut a Suziki motorcycle key.
Suz18 isn’t in the Dolphin xp005 software. You can cut Suz18 under YM63 and we got the key code by Lishi.
We are doing a duplication for the bike.
Let’s grab the vvdi key tool max. We are already connected.
Go to All Keys Lost->Yamaha, put code A7354 and you need the internet to actually use the code search on it.
Our jaw clamped in there, grab the shoulder stop here.
Fit it into a little groove here, you just simply slide the key and push the shoulder stop up.
You just push the key until you know hit the shoulder stop.
Clamp it in it just takes the guesswork out of it here you don’t have to eyeball it.
basically, you’re going to do it again as you can see so you got your shoulder stop in the groove here and you just slide the key until it until it hits the shoulder stop and then just clamp it
in and then i’m going to put this back on my little magnet up here tightens my grub screw and these magnets on top of the machine work really really well.
Then now we’re all ready to cut the key here. Just go ahead and uh hit cutting key. The machine will do its thing here.
We got the key, we’ll just loosen the grub screw here pull the key out and turn on the bike.
The key works perfectly.