How-to: add a key to a BMW GS 850 motorcycle using the XHORSE VVDI KEY TOOL PLUS with the new BMW motorcycle software and XM38 BMW smart key.
Xhorse vvdi key tool plus (or vvdi2)
Original motorcycle key
1. Generate BMW XM38 remote
Put XM38 remote into key tool plus
Go to Remote Program->BMW motorcycles->All remote->BMW Bike 8A Smart Key 434.42 Mhz
2. Program XM38 BMW motor smart key
Go to Immo programming->BMW->Select from system->BMW motorcycle key learning->Key function, Start programming
Let’s Delete key information
insert the key into the ignition switch ot close to the emergency start position
This key number 1 is acceptable, the frequency is right, chip is locked.
Read instructions. Do not touch any button on the vehicle during the programming process
make sure vehicle must have a power supply 12v.
if the programming is interrupted due to vehicle volatge or other reasns, try to continue programming first, if programming cannot continue, use the programmer to write normal FLASH before programming.
make sure internet is also stable.
Now it has the complete coding.
Read the key information one more time.
Then the unit is unlocked.
Before continue, we disconnect the unit and try to start the engine
We have a new key and let’s continue the process
connect the vvdi key tool plus OBD
The key is still in the induction coil.
put new XM38 key into key tool plus, delete key information
It is locked, it is a brand new keyless go key
the key is not learning to the car yet.
Put back original key and learn key
Select Add key
Put XM38 BMW motorcycle key identify key
Follow vvdi key tool to add new XM38 key until completed.